MT5600BA-V92-NAM Multi-Tech Systems, MT5600BA-V92-NAM Datasheet - Page 32
![MODEM V.92 WORLD DATA/FAX LEASE](/photos/1/47/14723/mt5600ba-v92-nam_sml.jpg)
MT5600BA-V92-NAM
Manufacturer Part Number
MT5600BA-V92-NAM
Description
MODEM V.92 WORLD DATA/FAX LEASE
Manufacturer
Multi-Tech Systems
Series
MultiModem® IIr
Specifications of MT5600BA-V92-NAM
Data Format
V.92
Interface
RS-232
Voltage - Supply
9 V ~ 12 V
Mounting Type
Desktop
Package / Case
9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1018
Remote configuration is a network management tool that allows you to configure modems anywhere in
your network from one location. With password-protected remote configuration, you can issue AT
commands to a remote MultiModem II modem for maintenance or troubleshooting as if you were on-site.
Basic Procedure
The following steps are valid regardless of whether the connection is established by the local or the
remote MultiModem II modem.
1. Establish a data connection with a remote MT5600BA-V92 modem.
2. Send three asterisks to initiate remote configuration. The remote modem responds:
3. Type the remote configuration password, and then press E
4. Type AT commands to configure the remote modem. It is not necessary to precede the commands
5. When you have finished configuring the remote modem, type *E and press E
Note:
Setup
Multi-Tech modems are shipped with a default setup password (MULTITECH). Because anyone who has
an owner’s manual knows the default setup password, for security you should change the password and
possibly also the remote configuration escape character.
Changing the Remote Configuration
Password
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Online Remote Access
Remote password:
not case-sensitive.
with “AT.”
configuration mode and return to online data mode. You can now break the connection in the normal
way.
Chapter 5 - Remote Configuration
The remote configuration password can be changed only from the front panel of the modem:
1. Turn on the modem.
2. Starting at the STATUS LCD, press
3. To change the password, press
4. To cancel the new password, press
The dialing command is not allowed in remote configuration mode.
•
•
LCD.
press
password, press the Enter button. The next time you remotely configure the modem you must
use the new password.
If the password is incorrect, the word CONNECT appears, and the local modem is returned to
online mode.
If the password is correct, an >AT_ command prompt appears.
to go to the next character. Repeat until you have entered the entire password.
or
until the password is erased. To save the new
to select the first character of the password, and then
NTER
to access the ENTER PASSWORD
. The default is “MULTITECH.” It is
Chapter 5 – Remote Configuration
NTER
to exit remote
32