HM2J08PE5110N9LF FCI, HM2J08PE5110N9LF Datasheet - Page 15

• Manufacturer Part Number: HM2J08PE5110N9LF
• Description: CONN HEADER 125POS 2MM R/A PRSFT
• Manufacturer: FCI
• Series: Millipacs®r
• Type: Br

Specifications of HM2J08PE5110N9LF

• Connector Type: Header, Male Pins
• Connector Style: B 25
• Number Of Positions: 125
• Number Of Positions Loaded: All
• Pitch: 0.079" (2.00mm)
• Number Of Rows: 5
• Mounting Type: Through Hole, Right Angle
• Termination: Press-Fit
• Connector Usage: CompactPCI
• Contact Finish: Gold
• Contact Finish Thickness: 31.5µin (0.80µm)
• Current Rating: 1.5A
• Voltage Rating: 500V
• Operating Temperature: -55°C ~ 125°C
• Product Type: Male
• Number Of Positions / Contacts: 125
• Mounting Angle: Right
• Termination Style: Press Fit
• Housing Material: Thermoplastic, High Temperature
• Contact Material: Phosphor Bronze
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 609-2123

TITLE
Copyright 2001 FCI USA, INC.
Form E-3334 02/12/01
Millipacs
Millipacs
Insertion press guidelines:
Actuate the insertion press
Remove assembly from insertion press.
Inspect product for proper application.
Millipacs
The recommended maximum force per press-fit has been determined to yield acceptable insertion
results for SnPb PTHs. While it is acceptable to use a lower force per press-fit, steps should be
taken to guarantee that the receptacle (header) is fully seated (see Section 10). Force settings may
vary with different types of PTH finishes. Customers should develop parameters that best suit
individual application requirements.
Actuation of the insertion press should be slow and controlled, not fast like a punch press.
Inserting to a certain pressure will yield more consistent results than inserting to a set distance.
Be sure to follow any safety requirements associated with the application equipment.
®
HM 5 and 8 Row Right Angle Signal Receptacles
®
Millipacs
HM 5 Row Receptacle or Header
EXAMPLE: For one Millipacs
press-fit tails being inserted into the PC board (signals only). Therefore, the maximum
recommended press setting would be 5625 N (110 press-fit tails x 45 N).
EXAMPLE: For one Millipacs
press-fit tails being inserted into the PC board (including both signals and grounds).
Therefore, the maximum recommended press setting would be 4950 N (110 press-fit
tails x 45 N).
Product Version
®
HM 8 Row Receptacle
®
Application Guide
HM Right Angle Headers
TYPE
APPLICATION SPECIFICATION
Figure 12 – Applying Force
®
®
HM 5 row Type A receptacle module B, there are 125
F
HM 8 row receptacle module type A, there are 110
PDM: Rev:B
45 N (10.1 lbs) Maximum Force Per Press-Fit
45 N (10.1 lbs) Maximum Force Per Press-Fit
Recommended Max Force Setting For
Application Press
STATUS:
NUMBER
PAGE
AUTHORIZED BY
T. De Rooster
15 of 22
Released
UNRESTRICTED
GS-20-022
REVISION
DATE
Printed: Feb 25, 2010
16-May-02
B
GS-01-001
.