PJRAS3X1S02 Switchcraft Inc., PJRAS3X1S02 Datasheet - Page 240

PHONO JACK 3POS R/A GRN/BLU/RED

PJRAS3X1S02

Manufacturer Part Number
PJRAS3X1S02
Description
PHONO JACK 3POS R/A GRN/BLU/RED
Manufacturer
Switchcraft Inc.
Series
PJRr
Datasheets

Specifications of PJRAS3X1S02

Rohs Information
Switchcraft RoHS Info.
Connector Type
Phono (RCA) Jack
Gender
Female
Signal Lines
Mono
Plug/mating Plug Diameter
3.20mm ID, 9.00mm OD (RCA)
Number Of Positions/contacts
3 Sets of 2 Conductors, 6 Contacts
Internal Switch(s)
Does Not Contain Switch
Mounting Type
Through Hole, Right Angle
Termination
Solder
Shielding
Shielded
Features
Grounding Tab
Color
Blue, Green, Red
Contact Plating
Nickel
Contact Material
Copper Alloy
Voltage Rating
34 Volts
Current Rating
2 Amps
Mounting Style
PCB
Orientation
Right Angle
Shell Plating
Steel
Termination Style
Solder
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
FAX: 773 792 - 2129
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
DESIGNATION STRIPS
Designation strips with protective covers are supplied with all
tini-telephone
jack panels. Replacement kits and individual parts are also
available. Legends can be marked in pencil, ink, or lettering
transfers. Kwik-Change
See illustration.
Three types of designation strips are available as accessories:
1. Kwik-Change single height.
2. Kwik-Change double height.
3. X-Wide vertical.
KWIK-CHANGE
(SINGLE HEIGHT)
Two types of single height designation strips are available:
1. SERIES 1600, A1600, B1600, C1600, 1700, B1700,
Mounting strips are fastened with four mounting screws
provided. Marking strip slides into the clear plastic cover, and
cover is snapped into place on the mounting strip. Legends
can be marked in pencil, ink, lettering transfers, typewriter, etc.
SPECIFICATIONS
(Used on panels 1600, A1600, B1600, C1600, 1700, B1700)
Mounting Strip: Extruded aluminum black anodized
Cover: Clear extruded plastic.
Marking Strip: White matte finish plastic.
Screws: Copper alloy, plated.
(Used on panels 1400300, 1600300)
Mounting Strip: Aluminum alloy, extruded, black anodized.
Cover: Clear extruded plastic.
Marking Strip: White matte finish plastic.
Screws: Steel, plated.
SERIES TT51 through TT62, TT-Connectorized (2-, 4- and
6-Wire), JP012000 through JP122000, TTPC and DSX
panels. Mounting strips are extruded as part of the panel.
Otherwise, use is the same as above.
ORDERING
Order by part number from table.
1400300, 2600300, JP012000 through JP122000
• Extruded aluminum mounting strip
• Four mounting screws
• Marking strips
• Clear plastic strip covers
®
jack panels, jackfields and certain standard
®
DESIGNATION STRIPS
®
is the name of all horizontal strips.
DIMENSIONS ARE FOR REFERENCE ONLY
(mm)
Inch
Kwik-Change Designation Strip
Kit Number DS318 (single height)
Kwik-Change Designation Strip
Kit Number TT501 (single height)
Kwik-Change Designation Strip
Kit Number TT516 (single height)
Kwik-Change Designation Strip
Kit Number DS301 (single height)
DESTINATION STRIPS
DESTINATION STRIPS
JACK PANELS
235

Related parts for PJRAS3X1S02