PJRAS3X1S02 Switchcraft Inc., PJRAS3X1S02 Datasheet - Page 8

• Manufacturer Part Number: PJRAS3X1S02
• Description: PHONO JACK 3POS R/A GRN/BLU/RED
• Manufacturer: Switchcraft Inc.
• Series: PJRr

Specifications of PJRAS3X1S02

• Rohs Information: Switchcraft RoHS Info.
• Connector Type: Phono (RCA) Jack
• Gender: Female
• Signal Lines: Mono
• Plug/mating Plug Diameter: 3.20mm ID, 9.00mm OD (RCA)
• Number Of Positions/contacts: 3 Sets of 2 Conductors, 6 Contacts
• Internal Switch(s): Does Not Contain Switch
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Shielding: Shielded
• Features: Grounding Tab
• Color: Blue, Green, Red
• Contact Plating: Nickel
• Contact Material: Copper Alloy
• Voltage Rating: 34 Volts
• Current Rating: 2 Amps
• Mounting Style: PCB
• Orientation: Right Angle
• Shell Plating: Steel
• Termination Style: Solder
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

FAX: 773 792 - 2129
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
QGP connectors (3 contacts only) feature Vel-Tone
non-reflective finish, gray TPR flex relief and plated
pins/contacts for the most demanding applications.
Preferred by audio professionals the world over, Switchcraft
QG
of finishes and contact platings. Features include:
• High performance inserts in traditional Switchcraft
• Solder terminals rotated for easier access and soldering.
• All metal housing.
AA Series Only
• Rugged 1-piece cable clamp to relieve pulling and twisting
• No Screws flex relief retention system.
• Integral bump shell grounding system.
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohm maximum, per pole.
Current Rating: 3 pole – 15A, 4 pole - 10A, 5 and 6
Insulation Resistance: 1,000 MΩ, minimum.
Dielectric Withstanding Voltage: 1,000 V (rms).
Capacitance: 2 pF between pins and 4 pF between pins
MECHANICAL
Insertion/Withdrawal Forces: 7 pound maximum,
Wire Size: #12 wire gauge solid; #14 wire gauge stranded
Q-G
Q-G
or black.
stresses on terminations.
pole – 7.5A, 7 pole – 5A @ 125VAC.
and shell, maximum (AA3M and AA3F).
5 pound nominal, insertion; 7 pound maximum,
5 pound nominal, withdrawal.
(3 contact). #14 wire gauge solid; #16 wire gauge stranded
(4 contact). #16 wire gauge solid; #18 wire gauge stranded
(5 and 6 contact). #18 wire gauge solid; #20 stranded
(7 contact). (Q-G and QGP).
Sleek, stream-
lined shell
Easy change
flex relief for
color coding
®
connectors feature unsurpassed durability and a choice
®
®
AUDIO CONNECTORS A, AA, AND QGP SERIES
CORD PLUG CONNECTORS (continued)
“No screws”
retention
system
Cable
clamp
Solid pins,
silver plated
for reliability
Solder terminals
rotated for easy
access & soldering
Bifurcated high
performance
socket contacts
DIMENSIONS ARE FOR REFERENCE ONLY
®
green
Light green, high
performance insert
Q-G
Q-G
®
®
®
®
Durable
metal latch
lock
CORD PLUG CONNECTOR – A, AA AND QGP SERIES
CORD PLUG CONNECTOR – A, AA AND QGP SERIES
MATERIAL
Q-G CONNECTORS (A AND AA SERIES)
Shell: Die-cast zinc. Satin nickel finish, black velvet.
Insert Insulation: Molded thermoplastic.
Socket Contacts: Silver-plated copper alloy tarnish-resistant;
bifurcated on 3-contact type. Gold is available
Pin Contacts: Silver-plated copper alloy. Resists tarnishing,
and provide excellent electrical conductivity. Gold is available.
Latchlock: High-strength die-cast zinc.
Latch Release: Steel, nickel-plated.
Latch Detent: Formed stainless steel.
Insert Screw: Stainless steel.
Flex Relief: TPR (thermoplastic rubber).
QGP CONNECTORS
Shell: Die-cast zinc, non-reflective gray Vel-Tone
Socket Contacts: Gold-plated copper alloy
Pin Contact: Gold-plated copper alloy
“Dual-point
shell grounding”
(mm)
Rugged cable
clamp to ground
(no screws)
Inch
CONNECTORS & RECEPTACLES
“No screws”
Rugged
metal shell
retention
system
Easy change
flex relief for
color coding
Standard nickel
or black finish
®
finish.
3