E3X-NA51 2M Omron, E3X-NA51 2M Datasheet - Page 10
![SENSOR PHOTOAMP FIBER 2M CBL](/photos/13/88/138894/e3x-na51_2m_sml.jpg)
E3X-NA51 2M
Manufacturer Part Number
E3X-NA51 2M
Description
SENSOR PHOTOAMP FIBER 2M CBL
Manufacturer
Omron
Series
E3X-NAr
Type
General Purposer
Specifications of E3X-NA51 2M
Amplifier Type
Standard
Voltage - Supply
12 V ~ 24 V
Output Type
PNP
Current - Supply
35mA
Mounting Type
DIN Rail
Fiber Optic Sensor Type
General Purpose
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
E3X-NA51-2M
E3XNA512M
Z2941
E3XNA512M
Z2941
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use the product in atmospheres or environments that exceed
product ratings.
Amplifier Units
● Designing
Communications Hole
The hole on the side of the Amplifier Unit is a communications hole for
preventing mutual interference when Amplifier Units are mounted
side-by-side. The E3X-MC11 Mobile Console (order separately)
cannot be used.
If an excessive amount of light is received via the Sensor, the mutual
interference prevention function may not work. In this case, make the
appropriate adjustments using the sensitivity adjuster.
The mutual interference prevention function will not operate when the
E3X-NA is used side-by-side with E3X-DA-N models.
● Mounting
DIN Track Mounting/Removal
Mounting Amplifier Units
1. Mount the Amplifier Units one at a time onto the DIN track.
2. Slide the Amplifier Units together, line up the clips, and press the
Removing Amplifier Units
Slide Amplifier Units away from each other, and remove from the DIN
track one at a time. (Do not attempt to remove Amplifier Units from the
DIN track without separating them first.)
Note: 1. The specifications for ambient temperature will vary according to the
Amplifier Units together until they click into place.
2. Always turn OFF the power supply before mounting or removing
number of Amplifier Units used together. For details, refer to Ratings
and Specifications.
Amplifier Units.
Clip
Precautions for Correct Use
WARNING
Click into
place
Fiber Connection and Disconnection
The E3X Amplifier Unit has a lock lever. Connect or disconnect the
fibers to or from the E3X Amplifier Unit using the following
procedures:
1. Connection
Open the Protective Cover, insert the fibers according to the fiber
insertion marks on the side of the Amplifier Unit, and lower the lock
lever.
2. Disconnection
Remove the Protective Cover and raise the lock lever to pull out the
fiber.
Note:To maintain the fiber properties, confirm that the lock is released
3. Precautions for Fiber Connection/Disconnection
Be sure to lock or unlock the lock lever within an ambient temperature
range between 10 C and 40 C.
● Operating Environment
Ambient Conditions
If dust or dirt adhere to the hole for optical communications, it may
prevent normal communications. Be sure to remove any dust or dirt
before using the Units.
● Other
Protective Cover
Be sure to mount the Protective Cover before use.
Lock button
Fiber
before removing the fiber.
Fiber insertion mark
Locked
Unlocked
10.7 mm
Protective cover
Insertion position
E3X-NA
10