E3X-NA51 2M Omron, E3X-NA51 2M Datasheet - Page 11
![SENSOR PHOTOAMP FIBER 2M CBL](/photos/13/88/138894/e3x-na51_2m_sml.jpg)
E3X-NA51 2M
Manufacturer Part Number
E3X-NA51 2M
Description
SENSOR PHOTOAMP FIBER 2M CBL
Manufacturer
Omron
Series
E3X-NAr
Type
General Purposer
Specifications of E3X-NA51 2M
Amplifier Type
Standard
Voltage - Supply
12 V ~ 24 V
Output Type
PNP
Current - Supply
35mA
Mounting Type
DIN Rail
Fiber Optic Sensor Type
General Purpose
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
E3X-NA51-2M
E3XNA512M
Z2941
E3XNA512M
Z2941
Amplifier Units with Connectors
● Mounting
Mounting Connectors
1. Insert the Master or Slave Connector into the Amplifier Unit until it
2. Join Amplifier Units together as required after all the Master and
3. Attach the seals (provided as accessories) to the sides of Master
Note: Attach the stickers to the sides with grooves.
Removing Connectors
1. Slide the slave Amplifier Unit for which the Connector is to be
2. After the Amplifier Unit has been separated, press down on the
clicks into place.
Slave Connectors have been inserted.
and Slave Connectors that are not connected to other Connectors.
removed away from the rest of the group.
lever on the Connector and remove it. (Do not attempt to remove
Connectors without separating them from other Amplifier Units
first.)
Sticker
Insert
Press down
Sticker
Remove
Lever
Mounting End Plate (PFP-M)
Depending on how it is mounted, an Amplifier Unit may move during
operation. In this case, use an End Plate.
Before mounting an End Plate, remove the clip from the master
Amplifier Unit using a nipper or similar tool.
The clip can also be removed using the following mechanism, which
is incorporated in the construction of the section underneath the clip.
1. Insert the clip to be removed into the slit underneath the clip on
2. Remove the clip by rotating the Amplifier Unit.
Pull Strengths for Connectors (Including Cables)
E3X-CN11: 30 N max.
E3X-CN12: 12 N max.
another Amplifier Unit.
Rotate
Clip
E3X-NA
11