CP2501EK Silicon Laboratories Inc, CP2501EK Datasheet - Page 5

• Manufacturer Part Number: CP2501EK
• Description: KIT EVALUATION CP2501
• Manufacturer: Silicon Laboratories Inc

Specifications of CP2501EK

• Main Purpose: Interface, Touch Screen Controller
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2501
• Primary Attributes: Evaluation Board with Glass Sensor (Laminated Glass Lens)
• Secondary Attributes: SPI, SMBus, or UART Interface
• Interface Type: USB, I2C, SPI, UART
• Operating Voltage: 3.3 V
• Data Bus Width: 16 bit
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• For Use With/related Products: CP2501, C8051F700
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1989

CP2501-EK
7. CP2501 Bootloader PC application
After installation, the CP2501 Bootloader PC application is located in the following default directory:
C:\SiLabs\MCU\CP2501EK\Software\CP2501_Bootloader.exe
The initial screen is shown in Figure 4.
Figure 4. CP2501 Bootloader PC Application
Once the application is loaded, all available HID devices in the system are listed in the Device Selection drop-down
menu. Search for the first instance that matches the desired CP2501 device. Once selected, the relevant device
information is populated the Device Information section.
Next, select the hex image file under Hex Image File Location and click Bootload. The CP2501 Bootloader
application will automatically put the device in bootloader mode, update the user firmware image, and reset the
device once the update is complete.
The two firmware images, CP2501EK_SINGLE_POINT_DEFAULT.hex and CP2501EK_MOUSE_DEFAULT.hex,
are available in the C:\Silabs\MCU\CP2501EK\Images\default directory.
Rev. 0.1
5