CK-V6-ML623-G Xilinx Inc, CK-V6-ML623-G Datasheet - Page 12

• Manufacturer Part Number: CK-V6-ML623-G
• Description: BOARD DEV V6 WITH TX
• Manufacturer: Xilinx Inc
• Series: Virtex™ 6 LXTr
• Type: FPGAr

Specifications of CK-V6-ML623-G

• Contents: Board, Cables, Documentation, Power Supply
• For Use With/related Products: Virtex™ 6 LXT, XC6VLX240T
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 1: ML623 Board Features and Operation
Table 1-1: Onboard Power System Devices
12
Core voltage controller and regulators
UCD9240PFC
PTD08A020W
PTD08A020W
PTD08A020W
Auxiliary voltage controller and regulators
UCD9240PFC
PTD08A020W
PTD08A020W
5V auxiliary power
PTV12010WAD
Device
Designator
Reference
U10
U12
U13
U19
U23
U22
U15
U8
Using External Power Sources
The maximum output current rating for each power regulator is listed in
design exceeds this value on any power rail, power for that rail must be supplied through
the external power jack using a supply capable of providing the required current.
Each power rail has a corresponding jack and jumper that is used to supply voltage to the
rail using an external power supply. The jack, jumper, and regulator for each power rail is
listed in
Disabling Onboard Power
Voltage regulators U10, U12, U13, U22, and U23 are disabled by installing a jumper across
pins 2 – 3 of header J14. Voltage regulator U15 is disabled by installing a jumper across pins
2 – 3 of header J19.
Default Jumper Positions
A list of shunts and shorting plugs and their required positions for normal board operation
is provided in
Caution!
power rail through its corresponding supply jack.
PMBus compliant digital PWM system
controller (address = 52)
Adjustable switching regulator
20A, 0.6V to 3.6V
Adjustable switching regulator
20A, 0.6Vto 3.6V
Adjustable switching regulator
20A, 0.6V to 3.6V
PMBus compliant digital PWM system
controller (address = 53)
Adjustable switching regulator
20A, 0.6V to 3.6V
Adjustable switching regulator
20A, 0.6V to 3.6V
Adjustable switching regulator
8A, 1.2V to 5.5V
Table
The power regulation jumper must be removed before applying external power to the
1-1.
Appendix A, Default Jumper
Description
www.xilinx.com
Positions.
Power Rail
VCCINT
VCCAUX
VCCO
VCC2V5
VCC3V3
VCC5
Net Name
UG724 (v1.1) September 15, 2010
Voltage
Typical
1.0V
2.5V
2.5V
2.5V
3.3V
5.0V
ML623 Board User Guide
Regulation
Jumper
Power
J102
J104
J105
J31
J30
J33
Table
1-1. If a
External
Supply
Jack
J223
J227
J175
J174
J173
J98