XBP09-DMDK Digi International, XBP09-DMDK Datasheet - Page 22

• Manufacturer Part Number: XBP09-DMDK
• Description: KIT STARTER PROMESH XBEE PRO
• Manufacturer: Digi International
• Series: XBEE-PRO™r
• Type: Transceiver, XBeePror

Specifications of XBP09-DMDK

• Frequency: 900MHz
• Wireless Frequency: 900 MHz
• Interface Type: RS-232, USB, UART
• Modulation: FHSS
• Security: 128 bit AES
• Operating Voltage: 3.3 V
• Output Power: 50 mW
• Antenna: RPSMA
• For Use With/related Products: Xbee-PRO Modules
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 602-1130

I/O Commands
Diagnostics
Diagnostics Commands
XBee‐PRO® 900 OEM RF Modules
AT
Command
D0
D1
D2
D3
D4
PR
AT
Command
VR
HV
ER
GD
RC
Name and Description
AD0/DIO0 Configuration. Configure options for the AD0/DIO0 line of the module.
Options include:
0 = Input, unmonitored
3 = Digital input, monitored
4 = Digital output low
5 = Digital output high
AD1/DIO1 Configuration. Configure options for the AD1/DIO1 line of the module.
Options include:
0 = Input, unmonitored
3 = Digital input, monitored
4 = Digital output low
5 = Digital output high
AD2/DIO2 Configuration. Configure options for the AD2/DIO2 line of the module.
Options include:
0 = Input, unmonitored
3 = Digital input, monitored
4 = Digital output low
5 = Digital output high
AD3/DIO3 Configuration. Configure options for the AD3/DIO3 line of the module.
Options include:
0 = Input, unmonitored
3 = Digital input, monitored
4 = Digital output low
5 = Digital output high
AD4/DIO4 Configuration. Configure options for the AD4/DIO4 line of the module.
Options include:
0 = Input, unmonitored
3 = Digital input, monitored
4 = Digital output low
5 = Digital output high
Set/read the bit field that configures the internal pull-up resistor status for the I/O lines.
"1" specifies the pull-up resistor is enabled. "0" specifies no pullup.
Bits:"
0 - DIO4/AD4 (Pin 11)
1 - AD3 / DIO3 (Pin 17)
2 - AD2 / DIO2 (Pin 18)
3 - AD1 / DIO1 (Pin 19)
4 - AD0 / DIO0 (Pin 20)
5 - RTS / DIO6 (Pin 16)
6 - DTR / SLEEP_RQ/DI08 / DIO8 (Pin 9)
7 - DIN / Config (Pin 3)
8 - Associate / DIO5 (Pin 15)
9 - On/Sleep / DIO9 (Pin 13)
10 - DIO12 (Pin 4)
11 - PWM0 / RSSI / DIO10 (Pin 6)
12 - PWM1 / DIO11 (Pin 7)
13 - DIO7/CTS (Pin 12)
14 - DOUT (Pin 2)
Name and Description
Firmware Version. Read firmware version of the module.
Hardware Version. Read hardware version of the module.
RF Errors Read the number of times we found the end of a valid preamble with a valid
hopping sequence and a valid packet type and some kind of error occurred in reading
the rest of the frame. When the value reaches 0xffff, it stays there.
Good packets Read the number of good frames with valid MAC headers that are
received on the RF interface. When the value reaches 0xffff, it stays there.
RSSI for channel Reads the DBM level of the designated channel.
© 2008 Digi International, Inc.
Parameter Range
0, 3-5
0, 3-5
0, 3-5
0, 3-5
0 - 7FFF
Parameter Range
0 - 0xFFFF [read-only]
0 - 0xFFFF [read-only]
n/a
n/a
0 to 11
0, 3-5
Default
0
0
0
0
0
0x3F7F
Default
Firmware-set
Factory-set
n/a
n/a
n/a
22