ATAB5423-3-WB Atmel, ATAB5423-3-WB Datasheet - Page 14

• Manufacturer Part Number: ATAB5423-3-WB
• Description: KIT DEMO 315MHZ BLACKBIRD
• Manufacturer: Atmel
• Type: Transceiver, UHFr

Specifications of ATAB5423-3-WB

• Frequency: 315MHz
• Product: RF Modules
• For Use With/related Products: ATA5423
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATAB-5423-3-WB

2.3.4
ATAB542x-x-WB User Guide
LIGHT SENSOR
HOW TO EXECUTE THE “TEMPERATURE SENSOR” FEATURE: One transceiver
should be left as a REMOTE at the *WAIT*, antenna icon (blinking) display. When
the other transceiver is put into MASTER mode, it starts sending packets and estab-
lishes communication with the REMOTE. The MASTER cycles through 3 screens: (1) M
TEMP, with AVR logo and antenna icon (blinking), and a thermometer icon, (2)
LOCAL, the measured temperature at the MASTER, and the thermometer icon, (3)
REMOTE, the reported measured temperature at the REMOTE, and the thermometer
icon. The REMOTE will cycle through the same 3 screens as the master, displaying R
TEMP instead of M TEMP.
During any of these 3 screens, on either the MASTER or SLAVE:
Exchanges and displays measured light intensities
Note:
Note:
P - accesses menu items
L - goes to power-up display (ATMEL SMARTRF...)
U,D - scrolls through menu (DIAGNOSTICS, LINK QUALITY, ...)
FSK - sets transmitter for ASK or FSK
x KBPS - sets data rate
*WAIT*, antenna icon (blinking) - transceiver is in REMOTE mode
L - returns TEMPERATURE SENSOR
U - toggles the displayed temperature between F and C
CH x - sets radio channel (0 - 9)
FSK - sets transmitter for ASK or FSK
Note: One transceiver should be left as a REMOTE at the *WAIT*, antenna icon (blinking)
P - sets mode and goes to x KBPS
L - goes to x KBPS
U,D - toggles between ASK and FSK
P - sets data rate and goes to *WAIT*, antenna icon (blinking)
L - goes to *WAIT*, antenna icon (blinking)
U,D - changes data rate (1,5,10 kbps for ASK; 1,5,10,20 kbps for FSK)
L - goes to TEMPERATURE SENSOR
R - puts transceiver into MASTER mode
P - sets channel and goes to FSK
L - goes to FSK
U - increments channel
D - decrements channel
P - sets mode and goes to x KBPS
L - goes to x KBPS
U,D - toggles between ASK and FSK
display. Set the other transceiver to MASTER (R joystick motion).
this demonstration requires 1 or more REMOTE transceivers
in the SYSTEM SETUP menu, under UNIT ID ADR utility, the REMOTE IDs can be set
manually to any value 0 to 255
Operating the Transceivers
5219A–WIRE–04/07
2-9