ATAB-STK-F Atmel, ATAB-STK-F Datasheet - Page 6

• Manufacturer Part Number: ATAB-STK-F
• Description: BOARD INTERFACE STK500 FLAMINGO
• Manufacturer: Atmel
• Series: Smart RFr
• Type: Interface Boardr

Specifications of ATAB-STK-F

• Frequency: 315MHz
• For Use With/related Products: ATSTK500
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6.3
6
Voltage Regulation Block
Hardware Description Flamingo
Figure 6-2.
There are two voltage regulators in the voltage regulation block for future use and for RF mod-
ules with supply voltages other than 5V. For the RF Design Kit, both voltage regulators are not
used. Hence, pin 1 and pin 2 of J15 and J16 have to be connected. To use the supply voltage
provided by the STK500, a connection between pin 2 and pin 3 is necessary. J17 offers the pos-
sibility to loop in a current meter to measure the RF module’s input current. During normal
operation, J17 should be connected; otherwise, the RF module should be disconnected from the
power supply. The complete configuration of the jumpers is depicted in
Figure 6-3.
Application Board Interface
Voltage Regulation Block
Figure
6-3.
4886B–RKE–01/06