X24-019PKC-RA Digi International/Maxstream, X24-019PKC-RA Datasheet - Page 39
![no-image](/images/no-image-200.jpg)
X24-019PKC-RA
Manufacturer Part Number
X24-019PKC-RA
Description
MOD RF 2.4GHZ 19.2K RS232/485
Manufacturer
Digi International/Maxstream
Series
XStream™r
Specifications of X24-019PKC-RA
Function
Transceiver, Modem
Modulation Or Protocol
FHSS
Frequency
2.4GHz ~ 2.4835GHz
Applications
General Purpose
Interface
RS-232, RS-485
Sensitivity
-102dBm
Power - Output
17dBm (50mW)
Data Rate - Maximum
20 kbps
Voltage - Supply
5V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
© 2006 MaxStream, Inc. Confidential & Proprietary
XStream‐PKG‐R™ RS‐232/485 RF Modem – Product Manual v5.x00 [2006.02.24]
TT (Streaming Limit) Command
VR (Firmware Version) Command
WR (Write) Command
<Networking> TT Command defines a limit on
the number of bytes that can be sent out before
a random delay is issued. TT Command is used to
simulate full-duplex behavior.
If a modem is sending a continuous stream of RF
data, a delay is inserted which stops its
transmission and allows other modems time to
transmit (once it sends number of bytes specified
by TT Command). Inserted random delay lasts
between 1 & ‘RN + 1’ delay slots, where each
delay slot lasts 38ms.
<Diagnostics> Read the Firmware Version of the
XStream Modem.
<(Special)> WR Command writes configurable
parameters to the modem’s non-volatile memory
(Parameter values remain in the modem’s
memory until overwritten by future use of WR Command).
If changes are made without writing them to non-volatile memory, the modem reverts back to
previously saved parameters the next time the modem is powered-on.
AT Command: ATTT
Binary Command: 0x1A (26 decimal)
Parameter Range: 0 – 0xFFFF (0 = disabled)
Default Parameter Value: 0xFFFF (65535
decimal)
Number of bytes returned: 2
Related Commands: RN (Delay Slots)
Minimum Firmware Version Required: 4.22
AT Command: ATVR
Binary Command: 0x14 (20 decimal)
Parameter Range: 0 – 0xFFFF [Read-only]
Number of bytes returned: 2
AT Command: ATWR
Binary Command: 0x08
39