ETRX2USB Telegesis Ltd, ETRX2USB Datasheet
![MODULE ZIGBEE USB STICK](/photos/14/16/141638/etrx2usb_sml.jpg)
ETRX2USB
Manufacturer Part Number
ETRX2USB
Description
MODULE ZIGBEE USB STICK
Manufacturer
Telegesis Ltd
Specifications of ETRX2USB
Function
Transceiver, ZigBee
Modulation Or Protocol
802.15.4 Zigbee
Frequency
2.4GHz
Applications
ISM
Interface
USB
Sensitivity
-98dBm
Power - Output
3dBm
Data Rate - Maximum
250kbps
Voltage - Supply
4.75 V ~ 5.25 V
Package / Case
Module
Module Applications
Commissioning Tool When Setting Up Networks
Compliance Standard
IEEE 802.15.4
Supported Devices
ETRX2
Module Interface
RS232, USB
Supply Voltage Range
4.75V To 5.25V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
920-1002
WINDOWS SOFTWARE
As a helpful starting point for developers, Telegesis
supplies the Telegesis Terminal application with the
ETRX2USB. This terminal program fully supports the
USB stick.
Host application development is very straightforward
as the ETRX2USB stick is simply accessed via a
virtual COM port.
USB FEATURES
ETRX2USB acts as a USB2.0 to serial bridge
connected to an ETRX2 module.
Driver Support for Windows 98SE/2000/XP, MAC.
OS-9, MAC OS-X, Linux.
Telegesis Terminal support for Windows.
Allows access to the module’s AT-Command line
interface via a virtual com port.
USB bus powered.
Supports Low power Modes.
USB 2.0 Full Speed Device, backwards compatible
to USB1.1 hosts.
Form factor: USB Stick L80mm x W26mm x
H8.5mm.
In circuit Programming/Debugging Headers allow
for custom firmware development based on the
ETRX2 platform.
On Request application specific firmware can be
developed.
Operating Temperature range -40
0
C - +85
0
C.
ETRX2USB – (ZigBee Technology)
Wireless Mesh Networking USB Stick
To accompany the Telegesis ETRX2 wireless mesh
networking modules the ETRX2USB universal serial bus
stick offers an easy way to ZigBee enable personal
computers.
Using a virtual com port the Telegesis AT-Command
interface - based on the EmberZNet meshing stack - can
be easily accessed by the application software. Custom
firmware development is also supported.
ETRX2 FEATURES
The ETRX2USB is also available in a Power
Amplified form – see ETRX2-PA for range &
specification details
ETRX2USB is based on the ETRX2 Ember EM250
single chip ZigBee / 802.15.4 solution with on die
16-bit XAP2b microprocessor).
No need for RF design experience or expertise.
2.4GHz ISM Band digital direct sequence spread
spectrum transceiver.
Hardware acceleration for IEEE802.15.4 operations.
Hardware supported encryption (AES-128).
Pre-programmed with Telegesis AT-Command
interface.
Can be configured to act as a ZigBee coordinator,
router or end device.
Ideal for use as a commissioning tool when setting
up networks.