X09-009PKC-UA Digi International/Maxstream, X09-009PKC-UA Datasheet - Page 7

• Manufacturer Part Number: X09-009PKC-UA
• Description: MODEM RF 900MHZ 9600BPS USB
• Manufacturer: Digi International/Maxstream
• Series: XStream™r

Specifications of X09-009PKC-UA

• Function: Transceiver, FHSS
• Modulation Or Protocol: FHSS, FSK
• Frequency: 900MHz
• Applications: ISM
• Interface: USB
• Sensitivity: -110dBm
• Power - Output: 20dBm (100mW)
• Data Rate - Maximum: 10 kbps
• Voltage - Supply: 5 V ~ 12 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

XStream‐PKG‐U™ USB RF Modem – Product Manual v4.2B5 [2006.02.27]
1.4. Pin Signals
1.5. Mechanical Drawings
1.4.1. Power Options
Figure 1‐03. Pins on the USB connector
Table 1‐02. USB Signals and their implementations on the XStream‐PKG‐U RF Modem
Two power options are available to the XStream-PKG-U RF Modem:
The external power must supply a DC voltage between 5 and 12 V. The power supply currently
shipped with MaxStream Development Kits is a suitable power supply for this option.
XStream-PKG-U RF Modem automatically selects “self-powered mode” if power is available on the
power connector when the RF modem is connected to USB. Do not disconnect the external power
source without first disconnecting the XStream-PKG-U RF Modem from the USB connector.
Figure 1‐04. Mechanical Drawings of the PKG‐U RF Modem
USB Pin
© 2006 MaxStream, Inc. Confidential and Proprietary
•
•
1
2
3
4
Bus-powered Mode – The RF modem powers itself directly from the USB host through the
USB cable.
Self-powered Mode – The RF modems is powered using an external power supply.
USB Name
VBUS
GND
D+
D-
Transmitted & Received Data
Transmitted & Received Data
Description
Ground Signal
Power
Transmit data to and from the RF Modem
Transmit data to and from the RF Modem
Implementation
Power RF Modem
Ground
7