F2M03MLA-S03 Free2Move, F2M03MLA-S03 Datasheet - Page 27

• Manufacturer Part Number: F2M03MLA-S03
• Description: MOD BLUETOOTH V2.0 W/ANTENNA
• Manufacturer: Free2Move

Specifications of F2M03MLA-S03

• Frequency: 2.4GHz
• Data Rate - Maximum: 3Mbps
• Modulation Or Protocol: Bluetooth v2.0+EDR, Class 1, 2 & 3
• Applications: Bluetooth v2.0
• Power - Output: 7.9dBm ~ 8.6dBm
• Sensitivity: -85dBm
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Receiving: 45mA
• Current - Transmitting: 75mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 647-1015-2; F2M03MLA-S03-R1B

Rev: c
Low power Multimedia Bluetooth™ Module with antenna F2M03MLA
Datasheet
6.2.10 IEC 60958 Interface
The IEC 60958 interface is a digital audio interface that uses bi-phase coding to minimise the DC content of
the transmitted signal and allows the receiver to decode the clock information from the transmitted signal.
The IEC 60958 specification is based on the two industry standards AES/EBU and the Sony and Philips
1
interface specification SPDIF. The interface is compatible with IEC 60958-1, IEC 60958-3 and IEC 60958-4
.
Note:
1
Subject to firmware support, contact Free2move for information.
The SPDIF interface signals are SPDIF_IN and SPDIF_OUT and are shared on the PCM interface pins.
The input and output stages of the SPDIF pins can interface either 75Ω coaxial cable with an RCA
connector or there is an option to use an optical link that uses Toslink optical components. Typical output
and input stage interfaces for the coaxial and alternative optical solution interface is shown in the figures
below.
F2M03MLA
Example circuit for SPDIF Interface with coaxial output
Note: The 100Ω and 75Ω resistors are dependent on the supply voltage and therefore subject to change.
F2M03MLA
Example circuit for SPDIF Interface with coaxial input
© 2007 Free2move AB
Page 27(27)