F2M03MLA-S01-R1A Free2Move, F2M03MLA-S01-R1A Datasheet - Page 14
![MOD BLUETOOTH MULTIMEDIA W/ANT](/photos/14/20/142010/mfg_f2m03mla-s01-r1a_sml.jpg)
F2M03MLA-S01-R1A
Manufacturer Part Number
F2M03MLA-S01-R1A
Description
MOD BLUETOOTH MULTIMEDIA W/ANT
Manufacturer
Free2Move
Datasheet
1.F2M03MLA-S03.pdf
(48 pages)
Specifications of F2M03MLA-S01-R1A
Frequency
2402MHz ~ 2480MHz
Data Rate - Maximum
1.5Mbps
Modulation Or Protocol
Bluetooth v2.0, Class 1, 2 & 3
Power - Output
8dBm
Sensitivity
-81dBm
Voltage - Supply
3.1 V ~ 3.6 V
Current - Transmitting
75mA
Data Interface
PCB, Surface Mount
Antenna Connector
On-Board, Chip
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Applications
-
Memory Size
-
Current - Receiving
-
Other names
647-1028-2
F2M03MLA-S04-R1A
F2M03MLA-S04-R1A
6.1.1
The ADC consists of two second order Sigma Delta converters allowing two separate channels that are
identical in functionality.
ADC Sample Rates
Each ADC supports the following sample rates:
ADC Gain
The ADC contains two gain stages for each channel, an analogue and a digital gain stage.
The digital gain stage has a range of –24dB to +21.5dB.
The ADC analogue amplifier is a two stage amplifier. The first stage of the analogue amplifier is responsible
for selecting the correct gain for either microphone input or line input and therefore has two gain settings,
one for the microphone and one for the line input. In simple terms the first stage amplifier has a selectable
20dB gain stage for the microphone and this creates the dual programmable gain required for the
microphone or the line input. The equivalent block diagram for the two stage is shown in the figure below.
The second stage of the analogue amplifier has a programmable gain with seven individual 3dB steps. In
simple terms, by combining the 20dB gain selection of the microphone input with the seven individual 3dB
gain steps, the overall range of the analogue amplifier is approximately -4dB to 40dB. The overall gain
setting of the ADC is a combined function of the digital and analogue amplifier settings, so that the fullscale
range of the input to the ADC is kept to approximately 400mV rms.
•
•
•
•
•
•
•
8kHz
11.025kHz
16kHz
22.05kHz
24kHz
32kHz
44.1kHz
ADC
First and second stage of ADC analogue amplifier block diagram
Low power Multimedia Bluetooth™ Module with antenna F2M03MLA
© 2007 Free2move AB
Datasheet
Page 14(14)
Rev: c