XC09-038PKC-RA Digi International/Maxstream, XC09-038PKC-RA Datasheet - Page 18

• Manufacturer Part Number: XC09-038PKC-RA
• Description: MODEM RF 900MHZ RS232/485 W/ACC
• Manufacturer: Digi International/Maxstream
• Series: 9XCite™r

Specifications of XC09-038PKC-RA

• Frequency: 900MHz
• Data Rate - Maximum: 38.4kbps
• Modulation Or Protocol: FHSS, FSK
• Power - Output: 6dBm
• Sensitivity: -104dBm
• Voltage - Supply: 2.85 V ~ 5.5 V
• Current - Receiving: 45mA
• Current - Transmitting: 55mA
• Data Interface: Connector, Female DB-9
• Antenna Connector: RP-SMA
• Operating Temperature: 0°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -

9XCite‐PKG‐R™ RS‐232/485 RF Modem – Product Manual v2.1 [2007.01.04]
4. RF Modem Configuration
4.1. Command and Parameter Types
4.1.1. AT Commands
4.1.2. Non-AT Settable Parameters (X-CTU Software configurable only)
The following versions of the XCite RF Modem are available:
XCite Modems can operate in both Single Channel and Hopping modes. Mode is selectable using
the "Function Set" dropdown list of the "XCite Configuration" tab of the MaxStream-provided X-
CTU Software.
The XCite Module is shipped with a unique parameter set in its memory. Parameters within the set
are organized under the following categories: AT Commands & Non-AT Settable Parameters.
AT Commands can be changed at any time by entering AT Command Mode and sending commands
to the modem.
AT Commands can be modified using the any of the following means:
Non-AT Settable Parameters can only be adjusted using the MaxStream-provided X-CTU Software.
To modify Non-AT Settable Parameter, connect the module to the serial com port of a PC (interface
board is necessary for RS-232 connection) and modify parameter values through the X-CTU Soft-
ware interface. These parameters enable features that need to be set before the module is used in
the field.
Non-AT Settable Parameters can only be modified using the following means:
© 2007 MaxStream, Inc.
• 900 MHz, 9600 Baud (RF data rate), Hopping Channel Mode
• 900 MHz, 9600 Baud, Single Channel mode
• 900 MHz, 38400 Baud, Hopping Channel mode
• 900 MHz, 38400 Baud, Single Channel mode
• X-CTU Software "Modem Configuration" tab
• X-CTU Software "Terminal" tab
• Terminal software program (such as "HyperTerminal")
• Microcontroller
• X-CTU Software "Modem Configuration" tab
18