ZB2430-Q-C-X-A Laird Technologies, ZB2430-Q-C-X-A Datasheet - Page 40

• Manufacturer Part Number: ZB2430-Q-C-X-A
• Description: MOD ANT CHIP ZIGBEE 2-100MW SMT
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of ZB2430-Q-C-X-A

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: AMR, ISM, Security and Access
• Power - Output: 10dBm ~ 20dBm
• Sensitivity: -99dBm
• Voltage - Supply: 3 V ~ 3.5 V
• Current - Receiving: 27mA
• Current - Transmitting: 25mA
• Data Interface: PCB, Through Hole
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -

ZB2430 User’s Manual - v1.6
The OEM Host issues this command to discover the 64-bit IEEE
address of a remote radio.
Note: This command is valid only for Coordinators and/or Router
devices. This command will not issue a response if the requested
address is unable to be located in the network. A timeout of several
seconds should be assumed when using this command.
D is co v e r IE EE A d d re ss & C h il d re n o f R em o t e R a d io
The OEM Host issues this command to discover the 64-bit IEEE
address of a remote radio as well as report a list of that device’s
Children.
Note: This command is valid only for Coordinators and/or Router
devices. This command will not issue a response if the requested
address is unable to be located in the network. A timeout of several
seconds should be assumed when using this command.
R ea d T e m p er at u r e
The OEM Host issues this command to read the onboard
temperature sensor.
Note: The temperature sensor is uncalibrated and has a tolerance of
+/- 3C. For calibration instructions, contact Aerocomm’s technical
support.
R ea d V o lt a g e
The OEM Hosts issues this command to read the input voltage to the
radio.
EE PROM Byte Re ad
www.aerocomm.com
Command: <0xCC> <0x8E> <0x00> <NWK Hi> <NWK Lo>
Number of Bytes Returned: 9
Response: <0xCC> <IEEE [7-0]>
Parameter Range:
<NWK Hi>
<NWK Lo> = LSB of remote radio’s NWK address
<IEEE>
Command: <0xCC> <0x8E> <0x00> <NWK Hi> <NWK Lo>
<0x01>
Number of Bytes Returned: 10+
Response: <0xCC> <IEEE [7-0]> <Length> <List>
Parameter Range:
<NWK Hi>
<NWK Lo> = LSB of remote radio’s NWK address
<IEEE>
<Length>
<List>
Command: <0xCC> <0xA4>
Number of bytes returned: 3
Response: 0xCC <+/-> <Temp.>
Parameter Range:
<+/->
<Temp.>
Command: <0xCC> <0xC0> <0xA6>
Number of Bytes Returned: 2
Response: <0xCC> <Voltage Integer> <Voltage Decimal>
Parameter Range:
<Voltage Integer>=Integer portion of voltage reading
<Voltage Decimal>=Decimal portion of voltage reading
Example Output: 0xCC 0x03 0x37
<0x03> =Integer portion is 3v
<0x37> =decimal portion is .55v
Voltage level is 3.55V
= MSB of remote radio’s NWK address
= 64-bit IEEE Address of remote radio
= MSB of remote radio’s NWK address
= 64-bit IEEE Address of remote radio
= Length of data to follow
= List of remote radio’s associated devices
= 0x2B: +
= Temperature (Celsius) (0x08 - 0x50)
[<Index n> <NWK Hi n> <NWK Lo n>]
0x2D: -
C O N F I G U R I N G T H E Z B 2 4 3 0
3 5