HEDS-8905 Avago Technologies US Inc., HEDS-8905 Datasheet - Page 10

• Manufacturer Part Number: HEDS-8905
• Description: TOOL ALIGNMENT 3CH 28MM CW
• Manufacturer: Avago Technologies US Inc.

Specifications of HEDS-8905

• Accessory Type: Mechanical Alignment Tool
• Product: Tools & Accessories
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: HEDS-914x Series
• For Use With: HEDS-9141#G00 - ENCODER MODULE 3CH 360CPRHEDS-9141#F00 - ENCODER MODULE 3CH 256CPRHEDS-9141#E00 - ENCODER MODULE 3CH 200CPRHEDS-9141#A00 - ENCODER MODULE 3CH 500CPRHEDS-9140#S00 - ENCODER MODULE 3CH 50CPRHEDS-9140#I00 - ENCODER MODULE 3CH 512CPRHEDS-9140#H00 - ENCODER MODULE 3CH 400CPRHEDS-9140#G00 - ENCODER MODULE 3CH 360CPRHEDS-9140#F00 - ENCODER MODULE 3CH 256CPRHEDS-9140#E00 - ENCODER MODULE 3CH 200CPRHEDS-9140#C00 - ENCODER MODULE 3CH 100CPRHEDS-9140-B00 - ENCODER MODULE 3CH 1000CPR516-1888 - ENCODER OPTICAL GAP 3CH 500CPR
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Orientation of Artwork for HEDS-9040 Option T00 (2000 CPR, 23.36mm Rop) and HEDS-9140 Option B00
(1000CPR, 11.00mm Rop)
The Index area on the HEDS- 9040 Option T00, 2000 CPR
and HEDS-9140 Option B00, 1000 CPR Encoder Module
has a nonsymmetrical pattern as does the mating Code-
wheel. In order for the Index to operate, the “Rightread-
ing” side of the Codewheel disk (the “Artwork Side”) must
point toward “Side A” of the Module (the side with the
connecting pins).
Because the Encoder Module may be used with either
“Side A” or with “Side B” toward the
* USE HEDM-6141#Txx or HEDM-5041#Bxx
Figure 7a.
*Please note that the image side of the codewheel must always be facing the module Side A.
10
IMAGE SIDE
OF CODEWHEEL*
MODULE SIDE B
MODULE SIDE A
HUB
* USE HEDM-6140#Txx or HEDM-5040#Bxx
Figure 7b.
Mounting Surface, Avago supplies two versions of Film
Codewheels for use with the Option T00 3-channel
Module and Option B00 3-Channel Module: Codewheel
HEDM-6140 Option TXX and HEDM-5040 Option Bxx has
the Artwork Side on the “Hub Side” of the Codewheel/
hub assembly and works with “Side B” of the Module on
the user’s mounting surface. Codewheel HEDM-6141
Option TXX and HEDM-5041-Bxx has the Artwork Side
opposite the “Hub Side” and works with “Side A” of the
Module on the mounting surface. For the Index to oper-
ate, these parts must be oriented as shown in Figure 7a
and 7b.
IMAGE SIDE
OF CODEWHEEL*
HUB
MODULE SIDE A
MODULE SIDE B