SS-3GPD Omron, SS-3GPD Datasheet
![SWITCH BASIC SPDT 3A PCB](/photos/15/28/152842/ss-3gpd__ss-3gpb__ss-01gpb__ss-01gpd_sml.jpg)
SS-3GPD
Specifications of SS-3GPD
SW769
Available stocks
Related parts for SS-3GPD
SS-3GPD Summary of contents
Page 1
... SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept • Insert molded case provides enhanced resistance to flux. • Switch rating 125 V AC possible with a single- leaf movable spring. Models for micro loads are also avail- able. RoHS Compliant Ordering Information Model Number Legend ■ ...
Page 2
... IEC IP40 Class I 175 −25°C to 85°C (at ambient humidity of 60% max.) (with no icing or condensation) 85% max. (for 5°C to 35°C) Approx. 1.6 g (pin plunger models) SS-P PCB terminals Uneven pitch Even pitch SS-3GPD SS-3GPB SS-3GLPD SS-3GLPB SS-3GL13PD SS-3GL13PB SS-01GPD SS-01GPB SS-01GLPD SS-01GLPB ...
Page 3
... VAC VDC 3 A Testing conditions: 5E4 (50,000 operations), T55 (0°C to 55°C) Dimensions Terminals ■ Note: All units are in millimeters unless otherwise indicated. (Terminal plate thickness is 0.5 mm for all models.) Solder Terminals 7.55± 0.2 7.3 3.3± 0.1 2.15 8.55 Three, 1 ...
Page 4
... All units are in millimeters unless otherwise indicated. 2. The following illustrations and drawings are for solder terminal models. Refer to page 3 for details on models with quick-connect terminals (#110) or PCB terminals. 3. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. 4. The operating characteristics are for operation in the A direction ( Pin Plunger Models ...
Page 5
... The minimum applicable load is the N-level reference value. This value indicates the malfunction reference level for the reliability level of 60% ( 60). The equation 0.5 × 10 λ λ cates that the estimated malfunction rate is less than 1/2,000,000 operations with a reliability level of 60%. 0. 100 ...
Page 6
... Tyco Electrocics AMP K.K. Japan Phone: +81-44-844-8111 U.S.A. Phone: +1-800-522-6752 This connector is for use with the SS-P and the terminal direction is 90° different from the SS Series. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. ...