D2SW-P2L3H Omron, D2SW-P2L3H Datasheet - Page 2

• Manufacturer Part Number: D2SW-P2L3H
• Description: SWITCH SIM ROLLER SPDT 2A SLDR
• Manufacturer: Omron
• Series: D2SW-Pr
• Type: Basic/Snap Actionr

Specifications of D2SW-P2L3H

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 2A @ 250VAC
• Actuator Type: Lever, Simulated Roller
• Mounting Type: Chassis Mount
• Termination Style: Solder Lug
• Operating Force: 61gf
• Contact Form: SPDT
• Contact Rating: 2 Amps at 50 Volts
• Actuator: Simulated Roller Lever
• Ingress Protection: IP67, Watertight
• Microswitch Type: Subminiature
• Actuator Style: Simulated Roller Lever
• Operating Force Max: 0.6N
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 2A
• Body Style: Subminiature
• Current, Rating: 2 A
• Dielectric Strength: 1500 VAC
• Force, Operating: 1.8 N (Max.)
• Ip Rating: IP67
• Mounting Hole Size: M2.3
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL Recognized
• Temperature Rating: -20 to +70 °C
• Termination: Solder
• Voltage, Rating: 250 VAC
• Mounting: PCB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2SWP2L3H; SW811; Z2129; Z2129

D2SW-P
■
Note
Specifications
■
Note
■
Note:
2
2A
0.1A
D2SW-P2
D2SW-P01
Operating speed
Operating frequency
Insulation resistance
Contact resistance (initial value)
Dielectric strength (see note 2)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Durability (see note 4)
Degree of protection
Degree of protection against electric shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Weight
List of Models
Rating
Ratings
Characteristics
Consult your OMRON sales representative for details on SPST-NO and SPST-NC models.
The ratings values apply under the following test conditions.
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 20 operations/min
1. The data given above are initial values.
2. The dielectric strength shown in the table indicates a value for models with a Separator.
3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the
4. Consult your OMRON sales representative for testing conditions.
5. The test to meet standards checks for water intrusion after immersion for 30 minutes. The test does not check for switching op-
Item
Model
values apply at the total travel position. Contact opening or closing time is within 1ms.
eration underwater. Refer to "Degree of Protection" of "Instructions for Correct Use".
Pin plunger
Hinge lever
Hinge roller le-
ver
Simulated roll-
er lever
Pin plunger
Hinge lever
Hinge roller le-
ver
Simulated roll-
er lever
Actuator
30 VDC
250 VAC
30 VDC
125 VAC
Rated voltage
Terminal
Model
D2SW-P2H
D2SW-P2L1H
D2SW-P2L2H
D2SW-P2L3H
D2SW-P01H
D2SW-P01L1H
D2SW-P01L2H
D2SW-P01L3H
Solder terminals
2 A
0.1 A
0.1 mm to 500 mm/s (pin plunger models)
Machanical : 120 operations/min max.
Electrical :
100 MΩ min. (at 500 VDC)
Terminal models : 50 mΩ max.
Molded lead wire models : 100 mΩ max.
1,000 VAC, 50/60 Hz for 1 min between terminals
of the same polarities
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each
terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s
Malfunction: 300 m/s
Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 50,000 operations min.
IEC IP67 (see note 5)
(excluding the terminals on terminal models)
Class 1
175
−20°Cto 70°C (at ambient humidity of 60% max.) (with no icing or condensation)
85% max. (for 5°C to 35°C)
Approx. 2 g (pin plunger models with terminals)
(20 operations/min.)
Resistive load
20 operations/min max.
D2SW-P2D
D2SW-P2L1D
D2SW-P2L2D
D2SW-P2L3D
D2SW-P01D
D2SW-P01L1D
D2SW-P01L2D
D2SW-P01L3D
D2SW-P2
2
{approx.30G} max.
2
PCB terminals
{approx. 100G} max.
D2SW-P2T
D2SW-P2L1T
D2SW-P2L2T
D2SW-P2L3T
D2SW-P01T
D2SW-P01L1T
D2SW-P01L2T
D2SW-P01L3T
Quick-connect terminals
Terminal models : 100 mΩ max.
Molded lead wire models : 150 mΩ max.
600 VAC, 50/60 Hz for 1 min between terminals
of the same polarities
Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 200,000 operations min.
(20 operations/min)
(#110)
D2SW-P01
D2SW-P2M
D2SW-P2L1M
D2SW-P2L2M
D2SW-P2L3M
D2SW-P01M
D2SW-P01L1M
D2SW-P01L2M
D2SW-P01L3M
Molded lead wires
D2SW-P