9472LE 4"X60YD 3M, 9472LE 4"X60YD Datasheet - Page 3

• Manufacturer Part Number: 9472LE 4"X60YD
• Description: LAMINATING ADHESIVE 4"X60YDS
• Manufacturer: 3M
• Series: 9472LEr

Specifications of 9472LE 4"X60YD

• Tape Type: Laminating
• Adhesive: Acrylic
• Backing, Carrier: Polycoated Kraft Liner
• Width: 4.00" (101.60mm) 1/3'
• Length: 180' (55.0m) 60 yds
• Usage: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Color: -
• Thickness: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-56050; 70-0062-9198-6; 70006291986; 9472LE; 9472LE; Q3264015; SCP284

3M
8132LE • 8153LE • 9453LE • 9471LE • 9472LE • 9653LE • 9671LE • 9672LE • 9698LE
Available Sizes:
Typical Physical Properties and Performance Characteristics: (continued)
Typical Adhesion
Properties
™
Adhesive Transfer Tapes with Adhesive 300LSE
Note: The following technical information and data should be considered representative or
The properties defined are based on the attachment of impervious faceplate materials
(such as aluminum) to a stainless steel test surface.
Bond Build-up: The bond strength of 3M™ Adhesive 300LSE increased as a function of
time and temperature, and has very high initial adhesion.
Humidity Resistance: High humidity has a minimal effect on adhesive performance.
No significant reduction in bond strength is observed after exposure for 7 days at 90°F
(32°C) and 90% relative humidity.
U.V. Resistance: When properly applied, nameplates and decorative trim parts are not
adversely affected by exposure.
Water Resistance: Immersion in water has no appreciable effect on the bond strength.
After 100 hours at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance: High bond strength is maintained after cycling four
times through:
Chemical Resistance: When properly applied, nameplates and decorative trim parts will
hold securely after exposure to numerous chemicals including oil, mild acids and alkalis.
Temperature Resistance: Adhesive 300LSE is usable for short periods (minutes, hours)
at temperatures up to 300°F (148°C) and for intermittent longer periods of time (days,
weeks) up to 200°F (93°C).
Lower Service Temperature: -40°F (-40°C).
Width and Length (subject to minimum order requirements):
Standard Sheet Size:
Limitations:
Minimum Slit Width:
Maximum Slit Width:
Normal Slitting Tolerance:
Core
*Custom sheets are available.
typical only and should not be used for specification purposes.
4 hours at 158°F (70°C)
4 hours at -20°F (-29°C)
4 hours at 73°F (22°C)
3M™ Adhesive Transfer Tapes
Maximum 360 yards
8132LE, 8153LE*
24 in. x 36 in.
- 3 -
± 1/32 in.
6.0 in.
12 in.
48 in.
1/2 in. to 63/64 in.: Maximum 180 yards
9453LE, 9471LE, 9472LE, 9653LE,
1 in. to 54 in.: Maximum 360 yards
3M™ Adhesive Transfer Tapes
9671LE, 9672LE, 9698LE
± 1/32 in.
1/2 in.
3.0 in.
54 in.
–