9472LE 4"X60YD 3M, 9472LE 4"X60YD Datasheet - Page 4

• Manufacturer Part Number: 9472LE 4"X60YD
• Description: LAMINATING ADHESIVE 4"X60YDS
• Manufacturer: 3M
• Series: 9472LEr

Specifications of 9472LE 4"X60YD

• Tape Type: Laminating
• Adhesive: Acrylic
• Backing, Carrier: Polycoated Kraft Liner
• Width: 4.00" (101.60mm) 1/3'
• Length: 180' (55.0m) 60 yds
• Usage: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Color: -
• Thickness: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-56050; 70-0062-9198-6; 70006291986; 9472LE; 9472LE; Q3264015; SCP284

3M
8132LE • 8153LE • 9453LE • 9471LE • 9472LE • 9653LE • 9671LE • 9672LE • 9698LE
Features
Application Techniques:
General Information:
™
Adhesive Transfer Tapes with Adhesive 300LSE
• 3M™ Adhesive 300LSE is a hi-strength acrylic adhesive that provides a very
• Excellent bond to low surface energy plastics such as, polypropylene and powder
• Excellent adhesion to lightly oiled surfaces typical of machine parts.
• Thickness range of 2.0 mils, 3.5 mils, 5.0 mils and 8.5 mils for use on smooth, or
• Extremely smooth adhesive for excellent graphics appearance.
• Double linered for selective die-cutting.
• Polycoated kraft liner for die-cutting end tabs and waste removed nameplates on
• 3M™ Adhesive Transfer Tapes 8132LE and 8153LE are double linered for
For maximum bond strength, the surface should be thoroughly cleaned and dried.
Typical cleaning solvents are heptane or isopropyl alcohol. Carefully read and follow
manufacturer’s precautions and directions for use when using cleaning solvents.
Bond strength can also be improved with firm application pressure and moderate
heat, from 100°F (38°C) to 130°F (54°C), causing the adhesive to develop intimate
contact with the bonding surface.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
for most pressure-sensitive adhesives because the adhesive becomes too firm to
adhere readily. However, once properly applied, low temperature holding is generally
satisfactory.
• Plastic nameplates or graphic overlays for use on low surface energy plastics.
• Waste removed nameplates on a common sheet for ease of application.
• Attaching membrane switch assemblies to powder coated surfaces and low surface
• Graphic overlays with end tabs for easy liner removal.
• Graphic application to surfaces such as wood, fabric, plastic, where very high bond
• Attaching identification material to lightly oily surfaces typical of machine parts.
high bond strength to most surfaces.
coatings.
rough surfaces.
a common carrier.
selective die-cutting.
energy plastics.
strength is required.
- 4 -