SST89V58RD2-33-C-NJE Microchip Technology, SST89V58RD2-33-C-NJE Datasheet - Page 38

• Manufacturer Part Number: SST89V58RD2-33-C-NJE
• Description: IC MCU 8BIT 40KB FLASH 44PLCC
• Manufacturer: Microchip Technology
• Series: FlashFlex®r

Specifications of SST89V58RD2-33-C-NJE

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 44-LCC (J-Lead)
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 36
• Eeprom Size: 8K x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: SST89xxxRD
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, UART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Data Sheet
TABLE
TABLE
©2007 Silicon Storage Technology, Inc.
Used as
Timer
Used as
Counter
Used as
Timer
Used as
Counter
1. The Timer is turned ON/OFF by setting/clearing bit
2. The Timer is turned ON/OFF by the 1 to 0 transition
1. Capture/Reload occurs only on timer/counter overflow.
2. Capture/Reload occurs on timer/counter overflow and a 1
TR1 in the software.
on INT1# (P3.3) when TR1 = 1 (hardware control).
to 0 transition on T2EX (P1.1) pin except when Timer 2 is
used in the baud rate generating mode.
Mode
5-2: Timer/Counter 1
5-3: Timer/Counter 2
receive and transmit
Baud rate generator
0
1
2
3
0
1
2
3
16-bit Auto-Reload
16-bit Auto-Reload
same baud rate
16-bit Capture
16-bit Capture
Transmit only
Receive only
8-bit Auto-Reload
8-bit Auto-Reload
Mode
Does not run
Not available
13-bit Timer
16-bit Timer
13-bit Timer
16-bit Timer
Function
Control
Internal
Control
00H
01H
34H
24H
14H
02H
03H
Internal
00H
10H
20H
30H
40H
50H
60H
-
T2CON
1
TMOD
1
External
Control
External
Control
0AH
0BH
T5-3.0 1255
08H
09H
36H
26H
16H
T5-2.0 1255
C0H
D0H
80H
90H
A0H
B0H
E0H
-
2
2
38
5.3 Programmable Clock-Out
A 50% duty cycle clock can be programmed to come out
on P1.0. This pin, besides being a regular I/O pin, has two
alternate functions. It can be programmed:
To configure Timer/Counter 2 as a clock generator, bit
C/#T2 (in T2CON) must be cleared and bit T20E in
T2MOD must be set. Bit TR2 (T2CON.2) also must be set
to start the timer.
The Clock-Out frequency depends on the oscillator fre-
quency and the reload value of Timer 2 capture registers
(RCAP2H, RCAP2L) as shown in this equation:
Where (RCAP2H, RCAP2L) = the contents of RCAP2H
and RCAP2L taken as a 16-bit unsigned integer.
In the Clock-Out mode, Timer 2 roll-overs will not generate
an interrupt. This is similar to when it is used as a baud-rate
generator. It is possible to use Timer 2 as a baud-rate gen-
erator and a clock generator simultaneously. Note, how-
ever, that the baud-rate and the Clock-Out frequency will
not be the same.
SST89V54RD2/RD / SST89V58RD2/RD
1. to input the external clock for Timer/Counter 2, or
2. to output a 50% duty cycle clock ranging from 122
Hz to 8 MHz at a 16 MHz operating frequency (61
Hz to 4 MHz in 12 clock mode).
n =
n x (65536 - RCAP2H, RCAP2L)
Oscillator Frequency
2 (in 6 clock mode)
4 (in 12 clock mode)
FlashFlex MCU
S71255-10-000
12/07