PIC-WEB Olimex Ltd., PIC-WEB Datasheet - Page 2

• Manufacturer Part Number: PIC-WEB
• Description: MCU, MPU & DSP Development Tools TCP-IP DEV BRD FOR PIC18F67J60
• Manufacturer: Olimex Ltd.

Specifications of PIC-WEB

• Processor To Be Evaluated: PIC18F67J60
• Data Bus Width: 8 bit, 16 bit
• Interface Type: RS-232, Ethernet, I2C, SPI
• Dimensions: 60 mm x 65 mm
• Operating Supply Voltage: 5 V
• Tool Type: Development Kit
• Core Architecture: PIC
• Cpu Core: PIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701532 25R4931

INTRODUCTION
BOARD FEATURES
Microchip’s open source TCP-IP stack AN833. The board is designed with 64-pin
high-performance, 1 Mbit Flash microcontroller with Ethernet - PIC18F67J60 and
supports: SLIP, ARP, IP, ICMP, TCP, UDP, HTTP, DHCP, FTP. The Microchip stack
is written very modular and flexible and you can enable or disable modules and
supports dynamic web pages which give you the possibility to control all PIC
resources remotely via FTP, HTTP, UDP, TCP etc. With this board you can
implement web and ftp server, send e-mails and almost everything what the big
servers do. The on board 1Mbit serial flash is available for data storage.
want a lot’s of images in your application you van also host them on other server
visible on the network where you have the PIC-WEB connected. The potential of
the board is to generate a fluid communication between some specific sensors or
actuators across a TCP/IP net including the controls of it.
and compile at any time. But you will probably need to modify it to your own
needs. The board comes with an implemented WEB server and a web page that let
you controls some of the features of the board. In this manual we’ll learn about how
to compile the TCP/IP stack to use it over the platform, the needed software, how
to use the pre loaded web page, and how to upload your own web pages in the
board.
used here is windows compatible only.
PIC-WEB is compact board with 65x60 mm size which is supported by
This board is designed to have Web page of no more than 128 kB. If you
The Microchip stack is an open source library, which is possible to modify
PIC18F67J60 microcontroller
1Mbit on board serial flash for web pages storage
ICSP/ICD connector for programming and debugging with PIC-ICD2, PIC-
ICD2-POCKET and PIC-ICD2-TINY.
Reset button
User event button
Analogue trimmer potentiometer
Thermistor for temperature monitoring
RS232 driver and connector
Complete web server and TCP-IP stack support as per Microchip's open
source TCP-IP stack
Power plug-in jack for +5VDC power supply
Voltage regulator +3.3V and filtering capacitors
status LED
Extension header to connect to other boards
PCB: FR-4, 1.5 mm (0,062"), solder mask, silkscreen component print
Dimensions 60x65 mm (2.36x2.55")
This manual requires Microsoft Windows© OS because several software
Page2