PIC-GSM Olimex Ltd., PIC-GSM Datasheet - Page 2

• Manufacturer Part Number: PIC-GSM
• Description: MCU, MPU & DSP Development Tools DEV BRD W/GSM MOD PIC18F97J60-I/PT
• Manufacturer: Olimex Ltd.

Specifications of PIC-GSM

• Processor To Be Evaluated: PIC18F67J50
• Data Bus Width: 8 bit
• Interface Type: Ethernet, USB, I2C, SPI, UART
• Dimensions: 100 mm x 80 mm
• Operating Supply Voltage: 5 V
• Tool Type: Development Kit
• Core Architecture: PIC
• Cpu Core: PIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1772148 51R7061

INTRODUCTION:
BOARD FEATURES:
ELECTROSTATIC WARNING:
The PIC-GSM board is shipped in protective anti-static packaging. The
board must not be subject to high electrostatic potentials. General practice
for working with static sensitive devices should be applied when working
with this board.
PIC-GSM is excellent board for adding remote monitoring and control in
remote places by GSM cellular network or ethernet or internet network. Do
you want to switch on/off your local heating in your mountain house? To
monitor the temperature at up to 8 remote points up to 30 meters away
from the module? To listen what happens in your house with silent call
after you get message for alarm status? Then PIC-GSM is the board for
you! It contains PIC18F97J60 microcontroller and 3-band GSM GPRS
module 900/1800/1900Mhz inside which covers most used GSM networks
around the world. The GSM antenna is build in the board so no need for
external expensive GSM antennas. PIC-GSM have two relays 240VAC/10A,
two opto-isolated inputs which could be connected to alarm sensors or just
buttons for user actions (like call pre-loaded phone numbers), on-board
temperature sensor and connector for additional up to 8 addressable
remote temperature sensors at up to 30 meter distance from the module.
Normal phone hook can be connected to this board and to allow user to
speak, listen, taking and placing phone calls as normal stand alone
cellular phone. PIC-GSM can be connected to PC with the USB connector it
have and it is recognized as modem which could be used to add internet
via GPRS to your computer (imagine how useful is this for your mountain
house if there is no internet but only cellular network!). If you have
internet connection you can monitor the same parameters on the WEB
page.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ICSP/ICD connector for programming and debugging with PIC-
ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY;
USB 2.0 type B connector allow board to be interfaced to PC host;
GSM/GPRS module 900/1800/1900Mhz;
Li-ion backup battery;
PIC18F97J60-I/PT;
Ethernet RJ45 isolated connector.
GSM Audio In and Out;
RS232 connector;
Quartz crystal 20Mhz;
Two relays 10A/250VAC;
Two digital inputs;
Analog input;
Temperature sensor;
5V voltage regulator;
EXT connector for available GPIO;
Four mounting holes 3,3 mm (0,13");
FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen
component print;
Dimensions 124x90 mm (4880 x 3540 mils);