II-EVB-600-3-220 Connect One, II-EVB-600-3-220 Datasheet - Page 7

• Manufacturer Part Number: II-EVB-600-3-220
• Description: MCU, MPU & DSP Development Tools iChip CO2464SEC EVAL BOARD 220V
• Manufacturer: Connect One

Specifications of II-EVB-600-3-220

• Processor To Be Evaluated: CO2064SEC
• Interface Type: RS-232, Ethernet
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

II-EVB-600 User Manual
2
This section describes the content of the II-EVB-600 package, provides additional relevant
documentation to enhance and fine-tune the II-EVB-600 functionality, and includes unpacking
and first-time configuration instructions. The final section of this chapter offers several ways to
test the II-EVB-600 LAN connection.
2.1
The II-EVB-600 is a turnkey boxed solution and, as such, is supplied with all necessary
accessories. The package includes the following items:
2.2
The II-EVB-600 is built around the iChip CO2064SEC. Great flexibility in configuration and
operation of this product can be achieved via proper use of the AT+i commands.
For the sake of simplicity, the II-EVB-600 configuration and operation is described in this
document mainly through the iChipConfig Utility.
The iChipConfig Utility and the iChipConfig Utility User Manual can be downloaded from the
Connect One website.
Note: Because documentation, utilities and firmware files change from time to time, please be
sure to check for the latest version on the Connect One website: http://www.connectone.com.
2.3
The II-EVB-600 installation is simple and all the required accessories are supplied with the
device.
The II-EVB-600 is provided pre-configured to work with LAN using COM1 on the
II-EVB-600 as host interface. For additional configuration options, see section
Settings.
Getting Started
➣ To install the II-EVB-600 and connect it to a LAN network:





Getting Started
What’s in the Package?
Additional Documentation
Unpacking and Installing
1
II-EVB-600 evaluation board
RS232 cable
RJ45 Cat 5 100BaseT cable
110V or 220V power supply
Extra iChip CO2064SEC
Connect the RJ45 cable to the II-EVB-600 RJ45 port. Connect the other end of
the cable to a 10/100BaseT or 100BaseT Ethernet switch or hub.
2.5 Jumper
Getting Started
2