HR30-6P-T02 Hirose Electric Co Ltd, HR30-6P-T02 Datasheet - Page 11

• Manufacturer Part Number: HR30-6P-T02
• Description: TOOL BACK SHELL TIGHTING COLLAR
• Manufacturer: Hirose Electric Co Ltd
• Series: HR30r
• Type: Tightening Collarr

Specifications of HR30-6P-T02

• Accessory Type: Collar
• Color: Silver
• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Tightens backshell to specified torque
• Fits Cable/wire: 26-30 AWG
• Wire Gauge Min (awg): 26
• Wire Gauge Range: 26-30
• For Use With/related Products: HR30 Series Backshells
• For Use With: HR594 - CONN JACK 6POS MALE SOLDERHR593 - CONN JACK 6POS MALE SOLDERHR583 - CONN PLUG 6POS MALE SOLDERHR582 - CONN PLUG 6POS FEMALE SOLDERHR581 - CONN PLUG 3POS FEMALE SOLDERHR580 - CONN PLUG 6POS MALE SOLDERHR579 - CONN PLUG 6POS FEMALE SOLDERHR578 - CONN PLUG 3POS FEMALE SOLDER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Shell Size - Insert: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *HR30-6P-T02; H9952; HR306PT02

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
3
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
5. Remove the assembly from the fixture.
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
When tightening the collar make sure that the cable will NOT turn.
Connector
10 and 12 Pos.
3 and 6 Pos.
Back shell tightening collar size
16 mm
18 mm
Torque
11