DE2E3KH222MA3B Murata, DE2E3KH222MA3B Datasheet - Page 45
![Ceramic Disc Capacitors Class X1 Y2 2200pF 250Vac E 20%](/photos/16/29/162973/113p01_sml.jpg)
DE2E3KH222MA3B
Manufacturer Part Number
DE2E3KH222MA3B
Description
Ceramic Disc Capacitors Class X1 Y2 2200pF 250Vac E 20%
Manufacturer
Murata
Series
DE2r
Specifications of DE2E3KH222MA3B
Voltage Rating
250 Volts
Operating Temperature Range
- 25 C to + 125 C
Termination Style
Radial
Product
Ceramic Disc Capacitors - Other Various
Dimensions
10 mm Dia.
Capacitance
2200 pF
Tolerance
20 %
Temperature Coefficient
E
Lead Spacing
7.5 mm
Capacitor Dielectric Type
CERAMIC DISC AND PLATE
Tolerance,
20%
Tolerance, -
20%
Temp, Op. Max
125(DEGREE C)
Temp, Op. Min
-25(DEGREE C)
Pitch,
ROHS COMPLIANT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
!Note
No.
13
14
15
16
17 Life
*
*
DEA Series (125 C Guaranteed / Class1 / DC1kV-3.15kV) Specifications and Test Methods
1
2
"Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
"C" expresses nominal capacitance value (pF).
Continued from the preceding page.
Soldering Effect
(On-Preheat)
Temperature
Cycle
Humidity (Under
Steady State)
Humidity
Loading
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Item
Appearance
Capacitance
Change
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
Q
I.R.
Dielectric Strength
(Between Lead
Wires)
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
Appearance
Capacitance
Change
Q
I.R.
No marked defect
Within ±2.5%
Per item 4.
No marked defect
Within ±5%
275+5/2C*
350 min. (30pF min.)
1000MΩ min.
Per item 4.
No marked defect
Within ±5%
275+5/2C*
350 min. (30pF min.)
1000MΩ min.
No marked defect
Within ±5%
275+5/2C*
350 min. (30pF min.)
1000MΩ min.
No marked defect
Within ±3%
275+5/2C*
350 min. (30pF min.)
2000MΩ min.
2
2
2
2
min. (30pF under)
min. (30pF under)
min. (30pF under)
min. (30pF under)
Specifications
DEA Series Specifications and Test Methods
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Then, as in the figure, the lead
wires should be immersed in
solder of 260+0/-5°C up to 1.5 to
2.0mm from the root of terminal
for 7.5+0/-1 sec.
Post-treatment:
The capacitor should be subjected to 5 temperature cycles.
<Temperature Cycle>
Post-treatment:
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity.
(Charge/Discharge currentV50mA)
Post-treatment:
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 125±2°C with a relative humidity of 50%
max. (Charge/Discharge currentV50mA)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Capacitor should be stored for 1 to 2 hrs. at room condition.*
Step
1
2
3
4
Temperature (°C)
Test Method
Room Temp.
Room Temp.
125±3
-25±3
Cycle time: 5 cycles
Thermal
Screen
Time (min)
30
30
3
3
Capacitor
Molten
Solder
1.5
to 2.0mm
43
C85E.pdf
1
1
1
1
1
Jul.13,2011
8