PVZ2A103C04R00 Murata, PVZ2A103C04R00 Datasheet - Page 33

• Manufacturer Part Number: PVZ2A103C04R00
• Description: Trimmer Resistors - SMD 10Kohms Open 2mm Carbon
• Manufacturer: Murata
• Type: Trimming Potentiometerr

Specifications of PVZ2A103C04R00

• Resistance: 10 KOhms
• Power Rating: 0.1 Watt (1/10 Watt)
• Operating Temperature Range: - 25 C to + 85 C
• Element Type: Carbon
• Dimensions: 2.1 mm W x 2.7 mm L x 0.8 mm H
• Product: Single-Turn Trimmer Potentiometers
• Termination Style: Solder Pad
• Tolerance: 30 %
• Number Of Turns: 1
• Taper: Linear
• Temperature Coefficient: +/- 500 PPM / C
• Product Type: Single Turn
• Adjustment: Top Crossed
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5
!Note
!Note
1. Use suitable screwdrivers that fit comfortably in
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
1. Please make sure that your product has been
2. Murata cannot guarantee trimmer potentiometer
32
PVM4 Series Notice
Flow Soldering Standard Profile
Notice (Handling)
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
Continued from the preceding page.
Type2: Hot dipping/Max. 2 min.
Type3: Ultra-sonic washing/Max. 1 min.
Type4: Hot dipping/Max. 1 min.+
Type5: Hot dipping/Max. 1 min.+
VESSEL MFG.: NO. 9000-2.6x30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
(Murata P/N : KMDR120)
(20W/litre or below)
Ultra-sonic washing/Max.1 min.
(20W/litre or below)
Ultra-sonic washing/Max. 30 sec.+
(20W/litre or below)/(Preferably max. 30 sec.)
Vapor/Max.30 sec.
260
200
150
100
0
Pre-heating(in the air)
60 to 120 sec.
(Melting zone)
10 sec. max.
Soldering
Gradual Cooling
(in the air)
Time
3. Please use within the effective rotational angle.
4. When using a lock paint to fix slot position,
If the condition is not suitable, the trimmer
potentiometer may deviate from specified
characteristics.
applied, the trimmer potentiometer may not
function.
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
Due to ultra-sonic cleaning equipment's peculiar
self-resonance point and that cleaning compatibility
usually depends on the jig construction and/or the
cleaning condition such as the depth of immersion,
please check the cleaning equipment to determine
the suitable conditions.
Reflow Soldering Standard Profile
260
200
180
150
100
0
Pre-heating(in the air)
60 to 120 sec.
150 to 180 C
(Melting zone)
30 to 50 sec.
Soldering
R50E13.pdf 04.6.11
Gradual Cooling
(in the air)
Time