PAG.M0.8GL.AZGK LEMO, PAG.M0.8GL.AZGK Datasheet - Page 28

• Manufacturer Part Number: PAG.M0.8GL.AZGK
• Description: Circular Push Pull Connectors 8-P PLUG W/ 3 COLLET MALE SOLDER
• Manufacturer: LEMO
• Series: 1P Seriesr

Specifications of PAG.M0.8GL.AZGK

• Product Type: Connectors
• Contact Style: Pin (Male)
• Shell Style: Plug
• Number Of Contacts: 8
• Mounting Style: Cable
• Termination Style: Solder
• Contact Plating: Copper / Nickel / Gold
• Current Rating: 5 A
• Voltage Rating: 350 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

26
Solder contacts
Assembly instructions
1
Solder
Solder
L
T
2
3
5
5
For PSU only:
We recommend ONLY the use of VTCS-6 Clear Vibra-tite or
ThreeBond 1401 to secure the connector backnut. The use of
other materials could result in damage to the connector.
The only recommended chemical cleaner is Isopropyl Alcohol.
1. Strip the cable according to the lengths given in the
2. Slide the collet nut ➀ and then the collet ➁ onto the cable.
3. Solder conductors into contacts, making sure that neither
4. Slide the collet ➁ forward and locate tag ➂ in the slot ➄ on
6
6
table. Tin the conductors.
solder nor flux gets onto the insulator or cable insulation.
the insulator ➅.
Slide collet nut ➀ over collet ➁ and then push the whole
assembly into the shell ➆ whilst turning it to ensure that the
tag ➂ locates in the inside slot of the shell. Tighten the collet
nut ➀ to the maximum torque of 0.25 Nm.
– Socket mounting nut torque = 1.5 Nm.
Configuration
M0.6 to M1.4
M0.4, M0.5
M0.2
N0.3
N0.4
7
7
14.0
13.0
12.5
11.5
11.5
Dimensions (mm)
L
4.0
3.0
2.5
3.5
3.5
T