PAG.M0.8GL.AZGK LEMO, PAG.M0.8GL.AZGK Datasheet - Page 50

• Manufacturer Part Number: PAG.M0.8GL.AZGK
• Description: Circular Push Pull Connectors 8-P PLUG W/ 3 COLLET MALE SOLDER
• Manufacturer: LEMO
• Series: 1P Seriesr

Specifications of PAG.M0.8GL.AZGK

• Product Type: Connectors
• Contact Style: Pin (Male)
• Shell Style: Plug
• Number Of Contacts: 8
• Mounting Style: Cable
• Termination Style: Solder
• Contact Plating: Copper / Nickel / Gold
• Current Rating: 5 A
• Voltage Rating: 350 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

48
Solder contacts
Assembly instructions
1
Solder
Solder
L
2
T
3
For PSU only:
We recommend ONLY the use of VTCS-6 Clear Vibra-tite or
ThreeBond 1401 to secure the connector backnut. The use of
other materials could result in damage to the connector.
The only recommended chemical cleaner is Isopropyl Alcohol.
1. Strip the cable according to the lengths given in the
2. Slide the collet nut ➀ and then the collet ➁ onto the cable.
3. Solder conductors into contacts, making sure that neither
4. Slide the collet ➁ forward and locate slot ➂ in the key of the
table. Tin the conductors.
solder nor flux gets onto the insulator or cable insulation.
insulator ➄.
Slide collet nut ➀ over collet ➁ and then push the whole
assembly into the shell ➆ whilst positioning it to ensure that
the slot ➅ of insulator ➄ locates in the inside key of the shell.
Tighten the collet nut ➀ to the maximum torque of 0.5 Nm
5 6
5 6
M08, M10, M12, M16, M19
M04, M05, M06, M07
Configuration
M26, M32
M02
M03
7
7
19.0
19.0
18.0
17.0
17.0
Dimensions (mm)
L
4.0
3.5
3.5
3.0
2.5
T
.