Si8501-C-IM Silicon Laboratories Inc, Si8501-C-IM Datasheet - Page 19

• Manufacturer Part Number: Si8501-C-IM
• Description: Board Mount Current Sensors 5A SINGLE OUTPUT 1kV
• Manufacturer: Silicon Laboratories Inc
• Type: AC Current Sensorr
• Series: -r

Specifications of Si8501-C-IM

• Current Rating: 5 A
• Supply Voltage: 2.7 V to 5.5 V
• Frequency Range: 50 KHz to 1 MHz
• Operating Temperature: - 40 C to + 125 C
• Accuracy: 5 %
• Current - Sensing: 5A
• Sensitivity: 392mV/A
• Current - Supply: 4mA
• Sensor Type: Closed Loop
• Voltage - Supply: 2.7 V ~ 5.5 V
• Output: Configurable
• Frequency: 50kHz ~ 1MHz
• Response Time: -
• Polarization: Unidirectional
• Package / Case: 12-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.3.5. Measurement Watchdog Timer and FAULT Output
A built-in watchdog timer disables measurement and holds OUT or OUT1 and OUT2 at their minimum values when
the time between integrator resets exceeds the FAULT Detect Time. The output signal from this watchdog is
available on the FAULT output pin (Si8517/8/9 only).
Figure 15 illustrates two means of entering a fault condition. Either fault condition 1 or 2 occurs when the reset
period exceeds the FAULT Detect Time, which ranges from 30 to 80 µs due process variations. The fault condition
ends when the next logic reset cycle begins.
FAULT Output
FAULT Output
Reset Logic
Reset Logic
Output
Output
Figure 15. Measurement Watchdog Timer Operation
Preliminary Rev. 0.21
FAULT Detect Time
FAULT Detect Time
FAULT Condition 1
FAULT Condition 2
30-80 µs
30-80 µs
t Cycle Reset
Si85xx
19