133-3402-101 Emerson Network Power, 133-3402-101 Datasheet - Page 4

• Manufacturer Part Number: 133-3402-101
• Description: CONN MCX PLUG RA RG178/U GOLD
• Manufacturer: Emerson Network Power
• Series: MCXr
• Type: Cable Plugr

Specifications of 133-3402-101

• Connector Style: MCX
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Snap-On
• Cable Group: RG-178, 196
• Frequency - Max: 6GHz
• Frequency-max: 6GHz
• Body Style: Right Angle
• Cable Type: RG 178/U, 196
• Features: Captivated Contact
• Frequency Range: 0 GHz to 6 GHz
• Housing Material: Brass
• Mounting Angle: Right
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: MCX
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 6 GHz
• Angle: Right Angle
• Finish, Housing: Gold
• Frequency: 0 to 6 GHz
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: MCX
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Plating: Gold Over Brass Except Where Noted
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1333402101; J531

MCX CRIMP TYPE STRAIGHT
CONNECTORS FOR FLEXIBLE CABLE
4
Assembly
Instructions
1. Identify connector parts. (3 piece parts except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin center conductor if
3. Assemble contact onto cable as shown.
4. Flair braid and slide body assembly over contact and under braid. Then seat body assembly firmly
contact is to be solder attached. Do not tin center conductor if contact is to be crimp attached. Slide
heat shrink (as applicable) and crimp sleeve onto jacket of cable.
Solder attachment. Solder contact to center conductor through solder hole using .020 (0.51)
diameter solder. Use a minimum of solder for a good joint.
Crimp attachment. Crimp contact to center conductor using Johnson Components® hand tool
140-0000-952 and die set 140-0000-953. Crimp location should be centered between end of con-
tact and cross hole. Crimp attachment to solid center conductor cable is not recommended.
onto contact. The cable may have to be held in a clamping fixture. Arrange braid uniformly around
crimp stem. Slide crimp sleeve forward and crimp using recommended crimp tool. Slide heat
shrink forward and shrink (as applicable).
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
RG 316/u, 161, 174, 188
RG 316/u, 161, 174, 188
RG 316/u, 161, 174, 188
RG 316DS, 188DS
RG 316DS, 188DS
RG 316DS, 188DS
RG 316/u, 161,
RG 178/u, 196
RG 179/u, 187
RG 178/u, 196
RG 178/u, 196
RG 316DS,
RG 178/u,
174, 188
GROUP
CABLE
188DS
196
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
133-3302-001/006
133-3302-401/406
133-3303-001/006
133-3303-401/406
133-3304-001/006
133-3304-401/406
133-3402-001/006
133-3403-001/006
133-3404-001/006
133-3433-001/006
133-5302-401/406
133-5303-401/406
133-5304-401/406
133-5402-001/006
133-5403-001/006
133-5404-001/006
NUMBER
PART
INCHES (MILLIMETERS)
.105 (2.67)
.105 (2.67)
.128 (3.25)
.128 (3.25)
.151 (3.83)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
.105 (2.67)
.128 (3.25)
.151 (3.83)
128 (3.25)
CRIMP
HEX