133-3402-101 Emerson Network Power, 133-3402-101 Datasheet - Page 7

• Manufacturer Part Number: 133-3402-101
• Description: CONN MCX PLUG RA RG178/U GOLD
• Manufacturer: Emerson Network Power
• Series: MCXr
• Type: Cable Plugr

Specifications of 133-3402-101

• Connector Style: MCX
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Snap-On
• Cable Group: RG-178, 196
• Frequency - Max: 6GHz
• Frequency-max: 6GHz
• Body Style: Right Angle
• Cable Type: RG 178/U, 196
• Features: Captivated Contact
• Frequency Range: 0 GHz to 6 GHz
• Housing Material: Brass
• Mounting Angle: Right
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: MCX
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 6 GHz
• Angle: Right Angle
• Finish, Housing: Gold
• Frequency: 0 to 6 GHz
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: MCX
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Plating: Gold Over Brass Except Where Noted
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1333402101; J531

INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Johnson Components
MCX CRIMP TYPE RIGHT ANGLE PLUGS
FOR FLEXIBLE CABLE - 75 OHM
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
1. Identify connector parts.
2. Strip cable to dimensions shown. Do not nick braid
3. Flair braid and slide cable into body making certain
4. Solder center conductor to contact through rear
5. Place expansion cap in access port and seat with
or center conductor. A wire stripper of correct size
is recommended for this step. Twist stranded center
conductor into tight bundle and tin (optional). Slide
crimp sleeve onto cable as shown.
that the cable dielectric bottoms on center contact.
Arrange braid uniformly around crimp stem. Slide
crimp sleeve over braid and crimp securely using
recommended crimp tool.
access port. Use a minimum amount of solder for
a full fillet joint. .020 (0.51) diameter solder is
recommended.
.156 (3.96) diameter flat punch or MCX hand
assembly tool 141-0000-908. Shrink heat shrink
tubing over crimp sleeve if applicable.
BELDEN 735A
CABLE TYPE
RG 179DS
RG 179
Instructions
PART NUMBER
Assembly
133-8433-101
133-8434-101
133-8445-101
CRIMP HEX
.128 (3.25)
.151 (3.83)
.151 (3.83)
7