IR3475MTR1PBF International Rectifier, IR3475MTR1PBF Datasheet - Page 18

• Manufacturer Part Number: IR3475MTR1PBF
• Description: IC BUCK SYNC ADJ 10A PQFN
• Manufacturer: International Rectifier
• Series: SupIRBuck™r
• Type: Step-Down (Buck), PWM - Current Moder

Specifications of IR3475MTR1PBF

• Internal Switch(s): Yes
• Synchronous Rectifier: Yes
• Number Of Outputs: 1
• Voltage - Output: 0.5 V ~ 12 V
• Current - Output: 10A
• Frequency - Switching: Up to 750kHz
• Voltage - Input: 3 V ~ 27 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: *
• Package / Case: *
• Primary Input Voltage: 27V
• No. Of Outputs: 1
• Output Voltage: 12V
• Output Current: 10A
• No. Of Pins: 17
• Operating Temperature Range: -40°C To +125°C
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Leaded Process Compatible: Yes
• Part Status: Preferred
• Package: PQFN / 4 x 5
• Circuit: Single Output
• Iout (a): 10
• Switch Freq (khz): 0 - 750
• Input Range (v): 3.0 - 27
• Output Range (v): 0.5 - 12
• Ocp Otp Uvlo Pre-bias Soft Start And: Constant On-Time + PGOOD + EN + Temp Comp OCP
• Digital Home Media: Yes
• Mobile Computing: Yes
• Industrial 24v Input: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PCB METAL AND COMPONENT PLACEMENT
* Contact International Rectifier to receive an electronic PCB Library file in your preferred format
 Lead lands (the 13 IC pins) width should be equal
 Lead land length should be equal to maximum
to nominal part lead width. The minimum lead to
lead spacing should be ≥ 0.2mm to minimize
shorting.
part lead length + 0.3 mm outboard extension.
The outboard extension ensures a large toe fillet
that can be easily inspected.
18
February 16, 2011 | ADVANCED DATASHEET | V1.8 | PD97602
Figure 31: Metal and Component Placement
10A Highly Integrated SupIRBuck
 Pad lands (the 4 big pads) length and width
should be equal to maximum part pad length and
width. However, the minimum metal to metal
spacing should be no less than; 0.17mm for 2 oz.
Copper or no less than 0.1mm for 1 oz. Copper or
no less than 0.23mm for 3 oz. Copper.
TM
IR3475