2154208-1 TE Connectivity, 2154208-1 Datasheet - Page 2

• Manufacturer Part Number: 2154208-1
• Description: SSL DRIVR UNIT 2100MA 18.36V 75W
• Manufacturer: TE Connectivity

Specifications of 2154208-1

• Output Current: 2.1A
• Output Voltage: 36V
• Output Power: 75W
• Input Voltage: 90V AC To 305V AC
• Power Supply Mounting: Wall
• Length: 192mm
• Width: 60mm
• Depth: 37mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A101441

The driver has over-voltage protection. The driver will
latch-off under over-voltage conditions. Connect to
LED load before turning on. Power up without LED
load will result in an over-voltage condition. If LED
load is not connected before powering on, connect the
correct LED load and cycle power to restart.
The driver has output short circuit protection. Driver
will auto-restart when output short circuit condition is
corrected. The driver also has output over-
temperature protection. Driver will shut off (latch-off)
when over-temperature condition is detected. Correct
over-temperature condition and cycle power to restart.
Rev B
Color Code
Colored Connector Stripe (On Bottom)
Figure 2
4. MOUNTING HARDWARE
NEVALO LED Drivers have two screw slots on each
end for mounting. The slots are designed to accept M3
screws. The screws are to be torqued from 0.28 to
0.45 N•m [2.5 to 4.0 in.-lbf].
5. REVISION SUMMARY
•
•
NOTE
Corrected name in Figure 1
Added new NOTE to Section 3
i
Feed-Thru
For power cycling, remove power from driver and
wait ten seconds before reapplying power.
Straight
Right-Angle
Colored Cable
Stripe
Colored Connector
Stripe (On Bottom)
Colored Connector
Stripe (On Back)
Colored Cable
Stripe
Colored Cable
Stripe
408-10419
2 of 2