PVZ3A201C01R00 Murata Electronics North America, PVZ3A201C01R00 Datasheet - Page 27

• Manufacturer Part Number: PVZ3A201C01R00
• Description: TRIM POT 200 OHM 3MM TOP ST
• Manufacturer: Murata Electronics North America
• Series: PVZ3r

Specifications of PVZ3A201C01R00

• Resistance (ohms): 200
• Termination Style: J Lead
• Power (watts): 0.1W, 1/10W
• Tolerance: ±30%
• Temperature Coefficient: ±500ppm/°C
• Number Of Turns: Single
• Adjustment Type: Top Adjustment
• Resistive Material: Carbon
• Mounting Type: Surface Mount
• Package / Case: Square - 0.126" L x 0.122" W x 0.073" H (3.20mm x 3.10mm x 1.85mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
1. Use suitable screwdrivers that fit comfortably in
2. Do not apply more than 4.9N (Ref. 500gf) of twist
1. Please make sure that your product has been
2. Murata cannot guarantee trimmer potentiometer
Notice (Handling)
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
VESSEL MFG.: NO. 9000-2.6x30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Murata P/N: KMDR120)
3. Please use within the effective rotational angle.
4. When using a lock paint to fix slot position,
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may cause
corrosion or electrical contact problems.
PVM4 Series Notice
R50E.pdf
25
11.1.17
4