CB-ACC-53 ConnectBlue, CB-ACC-53 Datasheet - Page 50
![no-image](/images/no-image-200.jpg)
CB-ACC-53
Manufacturer Part Number
CB-ACC-53
Description
ANTENNA DUAL-BAND RPSMA
Manufacturer
ConnectBlue
Datasheet
1.CB-ACC-53.pdf
(58 pages)
Specifications of CB-ACC-53
Antenna Type
Whip: 1/2 Wave, Swivel, Tilt (Right Angle)
Number Of Bands
2
Frequency
2.4GHz, 5GHz
Gain
3dBi
Termination
RP-SMA
Mounting Type
Connector
Height (max)
4.21" (107mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
809-1035
A.2.2 Serial Interface
The serial interface of the module is Logic Level logic levels and the module can be connected to
an external CPU (see section A.2.2.1).
An external driver is needed if the module should be on another physical interface like RS232 or
RS485/RS422 (see section A.2.2.2 - A.2.2.4).
CTS (Clear To Send) and RTS (Request To Send) are used for hardware flow control.
DSR (Data Set Ready) can be used to make a connect attempt. See the Serial Port Adapter AT
commands specification.
DTR (Data Terminal Ready) can be used to detect if the module is up and running and ready to
receive data.
Note! The module must be configured to flow control none if hardware flow control is
not used, see the Serial Port Adapter AT Commands specification for more info.
A.2.2.1 Logic level Mode
The serial UART interface can be used in a host controller application with a UART interface. The
design of the interface depends on the power supply voltage of the host system; see Figure 14
for a 3.0/3.3V host system and Figure 15 for a 5V host system.
Figure 14: A complete UART interface with a
3.0/3.3V host system.
Version 1.16 - 2009-12
Figure 15: A complete UART interface with a 5V host
system.
50