XK-Z11-S Digi International, XK-Z11-S Datasheet - Page 11

• Manufacturer Part Number: XK-Z11-S
• Description: ZIGBEE MODULE DEVELOPMENT KIT
• Manufacturer: Digi International
• Series: XBee™r
• Type: Transceiver, ZigBeer

Specifications of XK-Z11-S

• Frequency: 2.4GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 602-1193

Section 3: Performing a Range Test
What Is a Range Test?
Setting Up the Modules for the Range Test
A range test demonstrates the real-world RF range of the XBee embedded modules
in the Development Kit.
This range information is useful when planning for and deploying an actual network.
Select two modules to use in the range test, and do the following:
1. Connect them to the computer using USB cables. (You should have already done
2. Enter the SH - Serial Number High from the first module into the DH -
3. Enter the SL - Serial Number Low from the first module into the DL -
4. Click the Write button to save the addresses into the first module.
5. Repeat this process for the second module. (See figure below)
this in the previous section.) On the Modem Configuration tab, click Read to
view the configuration on each module.
Destination Address High of the second module.
Destination Address Low of the second module.
Note:
Note:
The default destination address is 0x00 (the coordinator). If you are using the coordinator
as one of the range test modules, then only the coordinator’s DH and DL parameters need
to be configured with the SH and SL values of the non-coordinator.
This process can be done one module at a time, by recording the address from one
module to enter into the other module.
Section 3: Performing a Range Test
11