Z7.282.0027.0 WIELAND ELECTRIC, Z7.282.0027.0 Datasheet - Page 395

• Manufacturer Part Number: Z7.282.0027.0
• Description: TERMINAL BLOCK JUMPER BAR, 40WAY, 8MM
• Manufacturer: WIELAND ELECTRIC
• Series: WK6r

Specifications of Z7.282.0027.0

• Accessory Type: Jumper
• No. Of Positions: 40
• Pitch Spacing: 8mm
• Row Pitch: 8mm
• For Use With: Wieland WK6/U Series DIN Rail Mount Terminal Blocks
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

wiecon
Insulated header for PC boards
Spacing: 5.00/5.08 mm
Rated current:
12 A
1000 V/4 kV/1 – Overvoltage category I
Rated voltages VDE 0110
UL ratings
CSA ratings
Approvals
250 V/4 kV/3 – Overvoltage category III
400 V/4 kV/2 – Overvoltage category II
Spacing: 5.00 mm
Spacing: 5.08 mm
Std. pack
100
100
11.40
11.56
G
5.08
T
5
Pole
2
2
Part no.
unmarked
25.330.3253.0
unmarked
25.350.3253.0
Typ 8113 S/... G, 8213 S/... G
plug-in vertical to PC board
No. 22 – 12 AWG
No. 22 – 12 AWG
q w ü i d
Solder pin 1.0 x 1.0 mm
Bore hole Ø 1.4 mm
250 V
300 V
15 A
15 A
ASI in-line connector in
insulation displacement technology
The ASI connector was developed for both
ASI bus systems and LON and EIBA
systems. In these systems, auxiliary
supply and information are transferred via
two wires of the bus line. The ASI in-line
connector, a pluggable PC board
connector with insulation displacement
technology (IDC), facilitates the required
signal tap-off from the actuator or sensor.
Wiring of the ASI connector is both easy
and effective. Both wires are inserted in
the open clamping body of the connector
and afterwards the cover is pressed on by
means of a vertical closing tool.
Connection to the printed circuit board is
made by plugging it on to a 2 pole header.
Note:
Instead of the special ASI cable, much
less expensive standard conductors are
used.
Material:
Insulating housing: PA 66/6
CI-index: ≥ 600
Flammability class UL 94-V-0
Contact parts:
Plating: special copper alloy
Assembly:
Special tools for high-volume assembly
upon request.
393