EPM7160SQC160-10N Altera, EPM7160SQC160-10N Datasheet - Page 11

• Manufacturer Part Number: EPM7160SQC160-10N
• Description: IC PLD EEPROM 160 MACROCELL 10NS QFP-160
• Manufacturer: Altera
• Series: MAX 7000Sr

Specifications of EPM7160SQC160-10N

• Cpld Type: EEPROM
• No. Of Macrocells: 160
• No. Of I/o's: 104
• Propagation Delay: 10ns
• Global Clock Setup Time: 3.4ns
• Frequency: 149.3MHz
• Supply Voltage Range: 4.75V To 5.25V
• Family Name: MAX 7000S
• Memory Type: EEPROM
• # Macrocells: 160
• Number Of Usable Gates: 3200
• Frequency (max): 125MHz
• Propagation Delay Time: 10ns
• Number Of Logic Blocks/elements: 10
• # I/os (max): 104
• Operating Supply Voltage (typ): 5V
• In System Programmable: Yes
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 160
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Altera Corporation
Each programmable register can be clocked in three different modes:
■
■
■
In EPM7032, EPM7064, and EPM7096 devices, the global clock signal
is available from a dedicated clock pin, GCLK1, as shown in
In MAX 7000E and MAX 7000S devices, two global clock signals are
available. As shown in
true or the complement of either of the global clock pins, GCLK1 or
GCLK2.
Each register also supports asynchronous preset and clear functions.
As shown in
product terms to control these operations. Although the
product-term-driven preset and clear of the register are active high,
active-low control can be obtained by inverting the signal within the
logic array. In addition, each register clear function can be
individually driven by the active-low dedicated global clear pin
(GCLRn). Upon power-up, each register in the device will be set to a
low state.
All MAX 7000E and MAX 7000S I/O pins have a fast input path to a
macrocell register. This dedicated path allows a signal to bypass the
PIA and combinatorial logic and be driven to an input D flipflop with
an extremely fast (2.5 ns) input setup time.
Expander Product Terms
Although most logic functions can be implemented with the five
product terms available in each macrocell, the more complex logic
functions require additional product terms. Another macrocell can
be used to supply the required logic resources; however, the
MAX 7000 architecture also allows both shareable and parallel
expander product terms (“expanders”) that provide additional
product terms directly to any macrocell in the same LAB. These
expanders help ensure that logic is synthesized with the fewest
possible logic resources to obtain the fastest possible speed.
By a global clock signal. This mode achieves the fastest clock-to-
output performance.
By a global clock signal and enabled by an active-high clock
enable. This mode provides an enable on each flipflop while still
achieving the fast clock-to-output performance of the global
clock.
By an array clock implemented with a product term. In this
mode, the flipflop can be clocked by signals from buried
macrocells or I/O pins.
Figures 3
MAX 7000 Programmable Logic Device Family Data Sheet
and 4, the product-term select matrix allocates
Figure
2, these global clock signals can be the
Figure
11
1.