S29GL512P11FFI020 Spansion Inc., S29GL512P11FFI020 Datasheet - Page 47

• Manufacturer Part Number: S29GL512P11FFI020
• Description: IC, FLASH, 512MBIT, 110NS, BGA-64
• Manufacturer: Spansion Inc.

Specifications of S29GL512P11FFI020

• Memory Type: Flash
• Memory Size: 512Mbit
• Memory Configuration: 128K X 16
• Ic Interface Type: Parallel
• Access Time: 110ns
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: BGA
• No. Of Pins: 64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10. Secured Silicon Sector Flash Memory Region
10.1
10.2
November 21, 2006 S29GL-P_00_A3
Factory Locked Secured SiliconSector
Customer Lockable Secured Silicon Sector
The Secured Silicon Sector provides an extra Flash memory region that enables permanent part identification
through an Electronic Serial Number (ESN). The Secured Silicon Sector is 128 words in length and all
Secured Silicon reads outside of the 128-word address range returns invalid data. The Secured Silicon
Sector Indicator Bit, DQ7, (at Autoselect address 03h) is used to indicate whether or not the Secured Silicon
Sector is locked when shipped from the factory.
Please note the following general conditions:
The Secured Silicon Sector is always protected when shipped from the factory and has the Secured Silicon
Sector Indicator Bit (DQ7) permanently set to a “1”. This prevents cloning of a factory locked part and ensures
the security of the ESN and customer code once the product is shipped to the field.
These devices are available pre-programmed with one of the following:
Customers may opt to have their code programmed through the Spansion programming services. Spansion
programs the customer's code, with or without the random ESN. The devices are then shipped from the
Spansion factory with the Secured Silicon Sector permanently locked. Contact your local representative for
details on using Spansion programming services.
The Secured Silicon Sector is typically shipped unprotected (DQ7 set to “0”), allowing customers to utilize that
sector in any manner they choose. If the security feature is not required, the Secured Silicon Sector can be
treated as an additional Flash memory space.
Please note the following:
On power-up, or following a hardware reset, the device reverts to sending commands to the normal
address space.
Reads outside of sector SA0 return memory array data.
Sector SA0 is remapped from memory array to Secured Silicon Sector array.
Once the Secured Silicon Sector Entry Command is issued, the Secured Silicon Sector Exit command
must be issued to exit Secured Silicon Sector Mode.
The Secured Silicon Sector is not accessible when the device is executing an Embedded Program or
Embedded Erase algorithm.
The ACC function and unlock bypass modes are not available when the Secured Silicon Sector is enabled.
Secured Silicon Sector
A random, 8 Word secure ESN only within the Secured Silicon Sector (at addresses 000000H - 000007H)
Both a random, secure ESN and customer code through the Spansion programming service.
Once the Secured Silicon Sector area is protected, the Secured Silicon Sector Indicator Bit is permanently
set to “0.”
The Secured Silicon Sector can be read any number of times, but can be programmed and locked only
once. The Secured Silicon Sector lock must be used with caution as once locked, there is no procedure
available for unlocking the Secured Silicon Sector area and none of the bits in the Secured Silicon Sector
memory space can be modified in any way.
The accelerated programming (ACC) and unlock bypass functions are not available when the Secured
Silicon Sector is enabled.
D a t a
000008h–00007Fh
000000h–000007h
Address Range
S h e e t
( A d v a n c e
Customer Lockable
S29GL-P MirrorBit
Table 10.1 Secured Silicon Sector Addresses
Determined by
customer
I n f o r m a t i o n )
TM
Flash Family
ESN Factory Locked
Unavailable
ESN
ESN or determined by customer
ExpressFlash Factory Locked
Determined by customer
45