SST25VF040B-50-4I-QAF SILICON STORAGE TECHNOLOGY, SST25VF040B-50-4I-QAF Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/6/610/silicon_storage_technology_sml.jpg)
SST25VF040B-50-4I-QAF
Manufacturer Part Number
SST25VF040B-50-4I-QAF
Description
4M FLASH MEMORY, SPI EEPROM, WSON-8
Manufacturer
SILICON STORAGE TECHNOLOGY
Datasheet
1.SST25VF040B-50-4I-QAF.pdf
(28 pages)
Specifications of SST25VF040B-50-4I-QAF
Memory Size
4Mbit
Clock Frequency
50MHz
Supply Voltage Range
2.7V To 3.6V
Memory Case Style
WSON
No. Of Pins
8
Svhc
No SVHC (18-Jun-2010)
Device
RoHS Compliant
Package / Case
WSON
Memory Type
Flash
Memory Configuration
512K X 8
Interface Type
Serial, SPI
Rohs Compliant
Yes
Data Sheet
MEMORY ORGANIZATION
The SST25VF040B SuperFlash memory array is orga-
nized in uniform 4 KByte erasable sectors with 32 KByte
overlay blocks and 64 KByte overlay erasable blocks.
DEVICE OPERATION
The SST25VF040B is accessed through the SPI (Serial
Peripheral Interface) bus compatible protocol. The SPI bus
consist of four control lines; Chip Enable (CE#) is used to
©2006 Silicon Storage Technology, Inc.
FIGURE 2: SPI P
SCK
CE#
SO
SI
MODE 3
MODE 0
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
MSB
ROTOCOL
HIGH IMPEDANCE
4
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
MSB
select the device, and data is accessed through the Serial
Data Input (SI), Serial Data Output (SO), and Serial Clock
(SCK).
The SST25VF040B supports both Mode 0 (0,0) and Mode
3 (1,1) of SPI bus operations. The difference between the
two modes, as shown in Figure 2, is the state of the SCK
signal when the bus master is in Stand-by mode and no
data is being transferred. The SCK signal is low for Mode 0
and SCK signal is high for Mode 3. For both modes, the
Serial Data In (SI) is sampled at the rising edge of the SCK
clock signal and the Serial Data Output (SO) is driven after
the falling edge of the SCK clock signal.
DON'T CARE
4 Mbit SPI Serial Flash
MODE 3
MODE 0
SST25VF040B
1295 SPIprot.0
S71295-01-000
1/06