PIC16LF874A-I/PT Microchip Technology, PIC16LF874A-I/PT Datasheet - Page 63

• Manufacturer Part Number: PIC16LF874A-I/PT
• Description: IC, 8BIT MCU, PIC16LF, 20MHZ, TQFP-44
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16LF874A-I/PT

• Controller Family/series: PIC16LF
• No. Of I/o's: 33
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Core Size: 8 Bit
• Program Memory Size: 4 Kwords
• Core Processor: PIC
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.0
Timer2 is an 8-bit timer with a prescaler and a
postscaler. It can be used as the PWM time base for the
PWM mode of the CCP module(s). The TMR2 register
is readable and writable and is cleared on any device
Reset.
The input clock (F
1:1,
T2CKPS1:T2CKPS0 (T2CON<1:0>).
The Timer2 module has an 8-bit period register, PR2.
Timer2 increments from 00h until it matches PR2 and
then resets to 00h on the next increment cycle. PR2 is
a readable and writable register. The PR2 register is
initialized to FFh upon Reset.
The match output of TMR2 goes through a 4-bit
postscaler (which gives a 1:1 to 1:16 scaling inclusive)
to generate a TMR2 interrupt (latched in flag bit,
TMR2IF (PIR1<1>)).
Timer2 can be shut-off by clearing control bit, TMR2ON
(T2CON<2>), to minimize power consumption.
REGISTER 7-1:
 2003 Microchip Technology Inc.
1:4
TIMER2 MODULE
bit 7
bit 6-3
bit 2
bit 1-0
or
1:16,
OSC
T2CON: TIMER2 CONTROL REGISTER (ADDRESS 12h)
/4) has a prescale option of
bit 7
Unimplemented: Read as ‘0’
TOUTPS3:TOUTPS0: Timer2 Output Postscale Select bits
0000 = 1:1 postscale
0001 = 1:2 postscale
0010 = 1:3 postscale
•
•
•
1111 = 1:16 postscale
TMR2ON: Timer2 On bit
1 = Timer2 is on
0 = Timer2 is off
T2CKPS1:T2CKPS0: Timer2 Clock Prescale Select bits
00 = Prescaler is 1
01 = Prescaler is 4
1x = Prescaler is 16
Legend:
R = Readable bit
- n = Value at POR
selected
U-0
—
TOUTPS3 TOUTPS2 TOUTPS1 TOUTPS0 TMR2ON T2CKPS1 T2CKPS0
by
R/W-0
control
R/W-0
bits
W = Writable bit
‘1’ = Bit is set
R/W-0
Register 7-1 shows the Timer2 Control register.
Additional information on timer modules is available in
the PICmicro
Manual (DS33023).
FIGURE 7-1:
Note 1: TMR2 register output can be software selected by the
Sets Flag
bit TMR2IF
T2OUTPS3:
T2OUTPS0
Postscaler
1:1 to 1:16
R/W-0
SSP module as a baud clock.
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
4
®
TMR2
Output
Reset
Mid-Range MCU Family Reference
EQ
(1)
R/W-0
PIC16F87XA
Comparator
TIMER2 BLOCK DIAGRAM
TMR2 Reg
PR2 Reg
x = Bit is unknown
R/W-0
1:1, 1:4, 1:16
T2CKPS1:
T2CKPS0
Prescaler
DS39582B-page 61
2
R/W-0
F
OSC
bit 0
/4