ADG1636BCPZ-REEL7 Analog Devices Inc, ADG1636BCPZ-REEL7 Datasheet - Page 15

• Manufacturer Part Number: ADG1636BCPZ-REEL7
• Description: IC, ANALOG SWITCH, DUAL, SPDT, LFCSP-16
• Manufacturer: Analog Devices Inc
• Type: Analog Switchr

Specifications of ADG1636BCPZ-REEL7

• Analog Switch Type: SPDT
• No. Of Channels: 2
• Bandwidth: 25MHz
• On State Resistance Max: 1ohm
• Turn Off Time: 182ns
• Turn On Time: 119ns
• Supply Voltage Range: 3.3V To 16V
• Design Resources: Precision Pulse Oximeter LED Current Sinks Using ADA4505-2, ADR1581, and ADG1636 (CN0125)
• Function: Switch
• Circuit: 2 x SPDT
• On-state Resistance: 1.2 Ohm
• Voltage Supply Source: Single, Dual Supply
• Voltage - Supply, Single/dual (±): 3.3 V ~ 16 V, ±3.3 V ~ 8 V
• Current - Supply: 1µA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-VQFN, CSP Exposed Pad
• Rohs Compliant: Yes
• Multiplexer Configuration: Dual SPDT
• Number Of Inputs: 2
• Number Of Outputs: 4
• Number Of Channels: 2
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (min): 3.3V
• Single Supply Voltage (typ): 5/9/12/15V
• Single Supply Voltage (max): 16V
• Dual Supply Voltage (typ): ±5V
• Dual Supply Voltage (max): ±8V
• Mounting: Surface Mount
• Pin Count: 16
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ADG1636BCPZ-REEL7TR

TERMINOLOGY
I
The positive supply current.
I
The negative supply current.
V
The analog voltage on Terminal D and Terminal S.
R
The ohmic resistance between Terminal D and Terminal S.
R
Flatness that is defined as the difference between the maximum
and minimum value of on resistance measured over the specified
analog signal range.
I
The source leakage current with the switch off.
I
The drain leakage current with the switch off.
I
The channel leakage current with the switch on.
V
The maximum input voltage for Logic 0.
V
The minimum input voltage for Logic 1.
I
The input current of the digital input.
C
The off switch source capacitance, which is measured with
reference to ground.
C
The off switch drain capacitance, which is measured with
reference to ground.
C
The on switch capacitance, which is measured with reference to
ground.
C
The digital input capacitance.
DD
SS
S
D
D
INL
ON
FLAT(ON)
S
D
D
IN
D
INL
INH
, I
(Off)
(Off)
, C
(Off)
(V
(Off)
(I
S
(On)
INH
S
S
)
(On)
)
Rev. A | Page 15 of 16
t
The delay time between the 50% and 90% points of the digital
input and switch on condition when switching from one address
state to another.
t
The delay between applying the digital control input and the
output switching on. See Figure 30.
t
The delay between applying the digital control input and the
output switching off. See Figure 30.
Charge Injection
A measure of the glitch impulse transferred from the digital input
to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
Total Harmonic Distortion + Noise (THD + N)
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
AC Power Supply Rejection Ratio (ACPSRR)
The ratio of the amplitude of signal on the output to the amplitude
of the modulation. This is a measure of the ability of the part to
avoid coupling noise and spurious signals that appear on the supply
voltage pin to the output of the switch. The dc voltage on the device
is modulated by a sine wave of 0.62 V p-p.
TRANSITION
ON
OFF
(EN)
(EN)
ADG1636