DSPIC30F4013-20E/P Microchip Technology, DSPIC30F4013-20E/P Datasheet - Page 31
![IC,DSP,16-BIT,CMOS,DIP,40PIN,PLASTIC](/photos/6/61/66192/150-40-dip_sml.jpg)
DSPIC30F4013-20E/P
Manufacturer Part Number
DSPIC30F4013-20E/P
Description
IC,DSP,16-BIT,CMOS,DIP,40PIN,PLASTIC
Manufacturer
Microchip Technology
Series
dsPIC™ 30Fr
Datasheets
1.DSPIC30F2011-20ISO.pdf
(66 pages)
2.DSPIC30F2011-20IP.pdf
(26 pages)
3.DSPIC30F3014-30IPT.pdf
(228 pages)
4.DSPIC30F3014-30IPT.pdf
(16 pages)
5.DSPIC30F3014-30IPT.pdf
(6 pages)
6.DSPIC30F3014-30IPT.pdf
(14 pages)
7.DSPIC30F3014-30IPT.pdf
(20 pages)
Specifications of DSPIC30F4013-20E/P
Rohs Compliant
YES
Core Processor
dsPIC
Core Size
16-Bit
Speed
20 MIPS
Connectivity
CAN, I²C, SPI, UART/USART
Peripherals
AC'97, Brown-out Detect/Reset, I²S, POR, PWM, WDT
Number Of I /o
30
Program Memory Size
48KB (16K x 24)
Program Memory Type
FLASH
Eeprom Size
1K x 8
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 5.5 V
Data Converters
A/D 13x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 125°C
Package / Case
40-DIP (0.600", 15.24mm)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
For Use With
AC30F003 - MODULE SOCKET DSPIC30F 40DIPACICE0206 - ADAPTER MPLABICE 40P 600 MIL
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
DSPIC30F4013-20EP
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DSPIC30F4013-20E/PT
Manufacturer:
Microchip Technology
Quantity:
10 000
9.2.3
The QE_Code is a byte in the first word of the
response. This byte is used to return data for query
commands, and error codes for all other commands.
When the programming executive processes one of the
two query commands (QBLANK or QVER), the returned
opcode is always PASS and the QE_Code holds the
query response data. The format of the QE_Code for
both queries is shown in
TABLE 9-3:
When the programming executive processes any
command other than a Query, the QE_Code
represents an error code. Supported error codes are
shown in
processed, the returned QE_Code is set to 0x0, which
indicates that there was no error in the command
processing. If the verify of the programming for the
PROGD, PROGP or PROGC command fails, the QE_Code
is set to 0x1. For all other programming executive
errors, the QE_Code is 0x2.
© 2010 Microchip Technology Inc.
QBLANK
QVER
Query
Table
0x0F = Code memory and data EEPROM
are NOT blank
0xF0 = Code memory and data EEPROM
are blank
0xMN, where programming executive
software version = M.N
(i.e., 0x32 means software version 3.2)
QE_Code FIELD
9-4. If a command is successfully
QE_Code FOR QUERIES
Table
QE_Code
9-3.
TABLE 9-4:
9.2.4
The response length indicates the length of the
programming executive’s response in 16-bit words.
This field includes the 2 words of the response header.
With the exception of the response for the READD and
READP commands, the length of each response is only
2 words.
The response to the READD command is N + 2 words,
where N is the number of words specified in the READD
command.
The response to the READP command uses the packed
instruction word format described in
“Packed Data
of program memory words (N odd), the response to the
READP command is (3 • (N + 1)/2 + 2) words. When
reading an even number of program memory words
(N even), the response to the READP command is
(3 • N/2 + 2) words.
0x0
0x1
0x2
QE_Code
RESPONSE LENGTH
Format”. When reading an odd number
No error
Verify failed
Other error
QE_Code FOR NON-QUERY
COMMANDS
Description
DS70102K-page 31
Section 8.3