LM87CIMT National Semiconductor, LM87CIMT Datasheet - Page 19

• Manufacturer Part Number: LM87CIMT
• Description: Temperature Sensor IC
• Manufacturer: National Semiconductor

Specifications of LM87CIMT

• Peak Reflow Compatible (260 C): No
• Ic Function: Temperature Sensor IC
• Supply Voltage Max: 3.8V
• Leaded Process Compatible: No
• Mounting Type: Surface Mount
• Operating Temperature Range: -40°C To +125°C
• Temperature Sensor Function: Temp Sensor
• Interface Type: Serial (2-Wire)
• Output Type: Digital
• Package Type: TSSOP
• Operating Temperature (min): -40C
• Operating Temperature (max): 125C
• Operating Temperature Classification: Automotive
• Operating Supply Voltage (typ): 3.3V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

9.0 WATCHDOG LIMIT COMPARISONS AND INTERRUPT
STRUCTURE
Figure 10
LM87 can generate Interrupts as a result of each of its internal
WATCHDOG registers on the analog, temperature, and fan
inputs.
External Interrupts can come from the following sources.
While the label suggests a specific type or source of Interrupt,
this label is not a restriction of its usage, and it could come
from any desired source:
•
Chassis Intrusion: This is an active high interrupt from
any type of device that detects and captures chassis
intrusion violations. This could be accomplished
mechanically, optically, or electrically, and circuitry
external to the LM87 is expected to latch the event. The
design of the LM87 allows this input to go high even with
no power applied to the LM87, and no clamping or other
depicts the Interrupt Structure of the LM87. The
FIGURE 10. Interrupt Structure
19
•
interference with the line will occur. This line can also be
pulled low for at least 20 ms by the LM87 to reset a typical
Chassis Intrusion circuit. This reset is activated by setting
Bit 7 of CI Clear Register (46h) high. The bit in the Register
is self-clearing.
THERM# Input: This is an active low interrupt that would
typically be generated by an external temperature
monitoring system. If the THERM# output is currently
inactive and this input is pulled low by an external circuit,
the THERM# Interrupt Status bit will be set. In addition, the
DAC output will be forced to full scale operation while
THERM# is pulled low by the external source. This allows
a separate thermal sensor to override the current fan
speed setting in an overtemperature situation not sensed
by the LM87. The DAC setting will return to normal when
www.national.com
10099531