PIC12CE519-04E/SN Microchip Technology, PIC12CE519-04E/SN Datasheet - Page 511

• Manufacturer Part Number: PIC12CE519-04E/SN
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,SOP,8PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12CE519-04E/SN

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 1.5KB (1K x 12)
• Program Memory Type: OTP
• Eeprom Size: 16 x 8
• Ram Size: 41 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-SOIC (3.9mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 309-1046 - ADAPTER 8-SOIC TO 8-DIP309-1045 - ADAPTER 8-SOIC TO 8-DIP
• Data Converters: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 28. ICSP
28.2
Entering In-Circuit Serial Programming Mode
The device is placed into a program/verify mode by holding the RB6 and RB7 pins low while rais-
ing the MCLR (V
) pin from V
to V
(see programming specification) and having V
at the
PP
IL
IHH
DD
programming voltage. RB6 becomes the programming clock and RB7 becomes the program-
ming data. Both RB6 and RB7 are Schmitt Trigger inputs in this mode, and when RB7 is driving
data it is a CMOS output driver.
After reset, to place the device into programming/verify mode, the program counter (PC) is at
location 00h. A 6-bit command is then supplied to the device. Some commands then specify that
14-bits of program data are then supplied to or read from the device, depending on if the com-
mand was a load or a read. For complete details of serial programming, please refer to the device
specific Programming Specifications.
During the In-Circuit Serial Programming Mode, the WDT circuitry is disabled from generating a
device reset.
28
1997 Microchip Technology Inc.
DS31028A-page 28-3