PIB02CB23150MV CARLO GAVAZZI, PIB02CB23150MV Datasheet - Page 2

• Manufacturer Part Number: PIB02CB23150MV
• Description: VOLTAGE MONITORING RELAY, SPDT, 230VAC
• Manufacturer: CARLO GAVAZZI
• Series: PIB02r

Specifications of PIB02CB23150MV

• Contact Configuration: SPDT
• Power Consumption: 4VA
• Supply Voltage Max: 230VAC
• Relay Mounting: Plug In
• Relay Terminals: Screw
• Control Voltage: 250V
• Leaded Process Compatible: Yes
• No. Of Poles: 1
• Rohs Compliant: Yes
• Carry Current: 8A
• Contact Rating: 8A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DIB02, PIB02
Output Specifications
Output
Contact ratings (AgSnO
Mechanical life
Electrical life
Operating frequency
Dielectric strength
Supply Specifications
Power supply
Dielectric voltage
Rated operational power
Mode of Operation
DIB02 and PIB02 monitor
both AC and DC over or
under current through an
external shunt.
When connected with MI or
MP current transformer (using
the 0.4 to 4 V
can monitor 1-phase or 3-
phase AC current up to 500 A.
Example 1
(connection between termi-
nals Z1, Y1 or 8, 9 - latching
function enabled)
The relay operates and latch-
es
when the measured value
2
Rated insulation voltage
Resistive loads
Small inductive loads AC 15
Dielectric voltage
Rated impulse withstand volt. 4 kV (1.2/50 µs)
Rated operational voltage
through terminals:
AC
DC
A1, A2 or A3, A2 (DIB02)
2, 10 or 11, 10
Supply to input
Supply to output
Input to output
in
operating
p
range) they
position
(PIB02)
DC 12
DC 13
B48:
B23:
724:
748:
AC 1
2
)
exceeds (or drops below) the
set level for more than the
set delay time.
Provided that the current has
dropped
exceeded) the set point (see
hysteresis setting), the relay
releases when the intercon-
nection between terminals
Z1, Y1 or 8, 9 is interrupted
or the power supply is inter-
rupted as well.
The red LED flashes until the
delay time has expired or the
measured value comes back
to a non-alarm value (see
hysteresis setting).
SPDT relay
250 VAC
µ
8 A @ 250 VAC
5 A @ 24 VDC
2.5 A @ 250 VAC
2.5 A @ 24 VDC
(at 8 A, 250 V, cos
Overvoltage cat. III
(IEC 60664, IEC 60038)
24 VDC ± 20%, insulated
48 VDC ± 20%, insulated
24/48 VAC ± 15%
45 to 65 Hz, insulated
115/230 VAC ± 15%
45 to 65 Hz, insulated
DC supply
2 kV
4 kV
4 kV
4 VA
3 W
30 x 10
10
7200 operations/h
2 kVAC (rms)
5
operations
6
operations
below
AC supply
4 kV
4 kV
4 kV
(or
= 1)
has
General Specifications
Example 2 (MI CT)
(no connection between ter-
minals Z1, Y1 or 8, 9 - latch
function disabled)
The relay operates when the
current flowing in the CT
exceeds (or drops below) the
set level for more than the
set delay time.
It releases when the current
drops below (or exceeds) the
set level (see hysteresis set-
ting) or when power supply
is interrupted.
Example 3 (MP CT)
(no connection between ter-
minals Z1, Y1 or 8, 9 - latch
Power ON delay
Reaction time
Accuracy
Indication for
Environment
Housing dimensions
Weight
Screw terminals
Approvals
CE Marking
EMC
Alarm ON delay
Alarm OFF delay
Temperature drift
Delay ON alarm
Repeatability
Power supply ON
Alarm ON
Output relay ON
Degree of protection
Pollution degree
Operating temperature
Storage temperature
DIn-rail version
Plug-in version
Tightening torque
Immunity
Emission
Specifications are subject to change without notice (30.10.03)
function disabled - over cur-
rent measurement)
The relay operates when the
maximum current flowing in
the CT exceeds the set level
for more than the set delay
time.
It releases when the maxi-
mum current drops below
the set level (see hysteresis
setting) or when power sup-
ply is interrupted.
Note
When the inhibit contact is
opened, if the input signal is
already in alarm position, the
delay time needs to elapse
before relay activation.
1 s ± 0.5 s or 6 s ± 0.5 s
(input signal variation from
-20% to +20% or from
+20% to -20% of set value)
< 100 ms
< 100 ms
(15 min warm-up time)
± 1000 ppm/°C
± 10% on set value ± 50 ms
± 0.5% on full-scale
LED, green
LED, red (flashing 2 Hz
during delay time)
LED, yellow
(EN 60529)
IP 20
3 (DIB02), 2 (PIB02)
-20 to 60°C, R.H. < 95%
-30 to 80°C, R.H. < 95%
22.5 x 80 x 99.5 mm
36 x 80 x 87 mm
Approx. 150 g
Max. 0.5 Nm
acc. to IEC 60947
UL, CSA (except 748)
Yes
Electromagnetic Compatibillity
According to EN 61000-6-2
According to EN 50081-1